Sirs:
Adrian Graham at the Online Computer Museum recommended I contact your group
to try to locate a disk for my Compaq Portable 3. I realize it falls into
the dinosaur category but someone gave it to me and the challenge of getting
it operational was too much to bear.
When it finishes counting all 640K of memory, it reminds me to use a setup
disk or hit "F1". When I do that, it mentions there is a non-system or bad
disk. Then the message keeps repeating when trying various type of DOS disks
…
[View More]I have. I have the feeling Compaq uses something like DOS but I have none of
those OS disks.
Any help would be appreciated.
Thank you,
Bob Schoppe
[View Less]
What kind of an HP 1000 uses those? Must be an A-series, the M/E/F machines
certainly don't... The 9000/800 series certainly do, can't speak for earlier
systems..
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
This is what Wayne Lafitte (the guy selling the TI CC-40 units) told me
about the product. He was a marketing manager at TI and he was
responsible for the CC-40.
"This product was manufactured out of Lubbock, Texas in 1982-1983
timeframe. There were only a few thousand 6K CC40s made and only a few
hundred 18K CC40s made. The wafertape (stringy floppy) met it's end early
on because of compatibility issues between units. These didn't make it
past the prototype stage (very few made). Most of the …
[View More]cartridges were
developed from the software libraries created for the TI59 and TI58 hand
held programmable calculators. The 18K CC40s were made to support the
industrial markets and VARs, but really didn't take off. If you remember,
the IBM PCs came out in 1983, the Hewlett Packard hand held programmable
calculators, and Texas Instruments fiasco with the TI99/4 home computer
pretty much killed this product. By the way, a new hand held calculator
(the TI88) was being prototyped at the same time as the CC40. The TI88 was
a very neat little replacement for the TI59 but the product was cancelled
before it was put in production because the CC40 was believed to be
better. In my opinion, that was a mistake.
"The CC40 products were mainly sold through TI employee sales stores and
never really reached the consumer market. There were a few VAR customers."
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
[View Less]
Well the RD52 in my 11/83 died, only the second failure for this box
in over 12 years. Tried to use the UC07 board (out of a mVax) to instal
a SCSI drive but can't get the 11/83 to recognize it, let alone format.
Anyone had success in using this board with the PDP11? I've set the
address to 172154 as the M7555 is still onboard to allow the rx33 as
the boot device. Will the DEC diags format the SCSI (i expect not)?
Thanks ........ nick o
In a message dated Tue, 20 Feb 2001 4:11:50 PM Eastern Standard Time, "wschoppe" <wschoppe(a)suffolk.lib.ny.us> writes:
<< Sirs:
Adrian Graham at the Online Computer Museum recommended I contact your group
to try to locate a disk for my Compaq Portable 3. I realize it falls into
the dinosaur category but someone gave it to me and the challenge of getting
it operational was too much to bear.
When it finishes counting all 640K of memory, it reminds me to use a setup
disk or hit "F1"…
[View More]. When I do that, it mentions there is a non-system or bad
disk. Then the message keeps repeating when trying various type of DOS disks
I have. I have the feeling Compaq uses something like DOS but I have none of
those OS disks.
Any help would be appreciated.
Thank you,
Bob Schoppe
>>
Although I don't personally have one, I believe you should be able to use a dos disk. The only caveat being I am pretty sure only has a 720k drive. If you can find a 720k disk, format it and put your favorite dos's system files on it and then try it. It may sound funny, but I just recently ran into the exact same problem with a GRiDcase 3. Works like a charm now :-)
-Linc Fessenden
[View Less]
Nick
Replacing an RD52 is not such a big problem. Just take a ST251 drive or
another MFM drive from an old PC and format it with your M7555 using XXDP
utility ZRQCH0.
Wim
----------
> Van: no <oliv555(a)arrl.net>
> Aan: classiccmp(a)classiccmp.org
> Onderwerp: Emulex woes
> Datum: dinsdag 20 februari 2001 17:26
>
> Well the RD52 in my 11/83 died, only the second failure for this box
> in over 12 years. Tried to use the UC07 board (out of a mVax) to instal
> a …
[View More]SCSI drive but can't get the 11/83 to recognize it, let alone format.
>
> Anyone had success in using this board with the PDP11? I've set the
> address to 172154 as the M7555 is still onboard to allow the rx33 as
> the boot device. Will the DEC diags format the SCSI (i expect not)?
>
> Thanks ........ nick o
[View Less]
Greetings and Happy Daytona 500 to all,
Yesterday, at the CU auction, I picked up a 'HP Entria' model
number "C3232A"...
>From what I can find on the web this is a color Xterminal. On the
bottom it says "color - Maximum Resolution 1280x1024"... BNC (10base2),
RJ45 (10baseT), serial, parallel, mouse, keyboard, HD15 video connector.
Does anyone have a power supply (20VAC, 2Amp, 4 pin rectangular
plug)? Any information? Does this require a code load from the
host, or is the code resident? Is …
[View More]the HD15 connector SVGA?
Thanks,
clint
PS I'll accept offers if someone wants to buy it also... It's pretty
small and light so shipping shouldn't be outrageous...
[View Less]
Stefanie Scott is seeking out Wisconsin area collectors for an article
she's writing for the Post-Crescent.
Please contact her directly at <sscott(a)smgpo.gannett.com>.
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
Hi,
I've got a VT200 here that's having display problems - vertically everything
seems fine but the display is garbled horizontally. Any ideas what to check
for? Might be a common fault with these things??
cheers
Jules
--
Thanks to everyone for responding. Please see my embedded comments below.
> >A friend will soon be receiving a TC2048 made by Timex of Portugal which he
> >wants to use in the US. Replacing the DC ps is no problem, but the
> composite
> > video out was designed for a 50 Hz PAL TV.
My error, it's TV RF out.
> >What's the best way to hook a US TV or monitor up to this beast?
>
> What connectors does it have?
To my knowledge just RF out.
> There …
[View More]used to be a mod for the UK 48k Spectrum to convert
> it's RF-out to a composite signal that could be viewed on US
> composite monitors. I'll have to poke around and see if I still have
> it somewhere. It may at least provide ideas on how to do a similar
> thing to the 2048.
Jeff, this would be very helpful. I believe the TC2048 is a 48K Spectrum is
a different package.
> That depends on what how much you object to modifying the machine...
Well . . . I think the owner would prefer not to but I'll pass along your
suggestions.
> If you don't mind modifications :
> It should be possible to tap off composite video at the input to the
> modulator can.
Sure, that's how my ZX81 is set up.
> It'll still be UK standard (50Hz vertical) but many
> composite mono monitors will display that if you tweak the verical hold
> knob.
Thanks, that's very helpful.
> Am I correct in assuming that this is a monochrome output machine
> anyway, so the colour encoding differences (NTSC .vs. PAL) are irrelevant?
As stated above it's a 48K Speccy in sheep's clothing, so it *is* color.
> I believe some Timex/Sinclair machines have links you can move to select
> various video formats (although does this also involve a ROM change?)
Tony, you are correct in that the ZX81 and TS1000 pcb had various traces
labeled "US," "UK," "FR," etc. but I doubt the TC2048 does (since the
Spectrum didn't).
No ROM change is required.
> You
> might be able to get it to output 60Hz vertical video. And replace the
> modulator with a US-standard VHF one (UK machines have a UHF TV output).
> But you're now starting to seriously modify the machine.
Hmm, probably not acceptable to the owner. BTW many ZX81s sold in the US
(including the outrageously expensive kits offered by Zebra) shipped with UHF
RF modulators.
> If you want to keep it original, you need to get a UK-standard TV.
> They're trivial to get over here (including quite small ones -- 5" and 9"
> CRT models exist, 12" and 14" are common). Maybe one could be shipped
> over to the States...
Probably the best solution. See below.
> He said a TC2048. I wonder if he meant 2068, which *is* colour,
unfortunately.
Cameron, you might be confusing the TC2068 and the TS2068.
> It seems that most American TVs are not PAL friendly. I wonder why it's so
> much easier to get an NTSC/PAL set in the rest of the world than it is here.
Think about that question for a moment and ask yourself if you *really* want
to know the answer ;>}
> If they had access to a video card such as ATI's
> All-In-Wonder that provide for both inputs and outputs, it should be
> possible to input a PAL signal and dispaly it on an NTSC screen,
> though they could also just view the input in a window on thier
> screen as well.
Jeff, great idea! Thanks!
> I use a Formac ProTV and can view PAL on that (makes sense, since Formac
> is a German company :-)
And thanks to you too, Cameron. By pure coincidence I'm spending a week in
Germany next month, attending the annual meeting of ZX-TEAM, the last active
ZX81 user group. I could bring back a small color TV for my friend to use
with the TC2048.
Glen
0/0
[View Less]
