Tony Duell wrote:
> The ZX81 uses a 3.5mm jack socket (what you call a 'phone socket' across
> the Pond) for the power input. The tip is +ve and the sleeve is -ve.
Actually, in the States a "phone plug" or "phone jack" is 1/4" -- the kind
used in ancient telephone switchboards, hence the name. To make it more
interesting we also have "phono" (aka RCA) jacks and plugs, used for
connecting phonographs and their amplifiers. Do these connectors have
different names on your side?
Glen
0/0
I was just wondering if anyone knew anything about the IBM System/38, or had any software or books for it. Do y'all think it is collectable?
Thanks,
Owen
I'm still here
Changed ISP Sorry
New e-mail:
fauradon(a)mn.mediaone.net
new web:
http://people.mn.mediaone.net/fauradon
-----Original Message-----
From: Hans Franke <Hans.Franke(a)mch20.sbs.de>
To: classiccmp(a)classiccmp.org <classiccmp(a)classiccmp.org>
Date: Tuesday, April 04, 2000 2:22 PM
Subject: OT Paging for Fran?ois
>Sorry for using this medium - just I got no other idea
>left to contact him.
>
>Does anybody have a valid mail address, or other mean
>of contact for Francois ?
>Las known mail address: fauradon(a)pclink.com
>His web pages at http://www.pclink.com/fauradon/
>are still accessible.
>
>Thank you
>Hans
>
>--
>VCF Europa am 29./30. April 2000 in Muenchen
>http://www.vintage.org/vcfe
>http://www.homecomputer.de/vcfe
Hi,
I can't figure out what the heck these two Intersil chips are; one is a 6003
and the other is an 5110. Also, I have these qbus boards from Sky Computer
that I have no clue what they are; they're all quad height (assuming that
means they have four connectors). They are Skywar-Q-A-03, Skywar-Q-B-03, and
Skydpmem-Q-02.
Will J
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
>There is a rack of mystery DEC equipment, lots of green G series
>boards, etc. At the top of the rack is an array of lights, and
>I found a plastic panel that obviously was supposed to be over those
>lights. I've taken a photo of the panel, hopefully someone can
>identify it for me. Other stuff in the rack is on wirewrap backplanes,
>and the flip chips are plugged in from the bottom, i'm guessing this
>stuff goes with the 8/L cpu. http://www-users.itlabs.umn.edu/~lemay/panel.jpg
Seeing as how there's 7 lights for track address bits on the panel
(implying up to 128 tracks) and there's a big sticker saying "DF:"
on the bottom, I'm going to hazard a guess that this is a status
panel for a RF08 or RF11 disk controller.
I'm leaning towards RF11, as the data width on the panel appears to be
16 bits. (Maybe the same panel was used on both the RF11 and RF08... I
dunno.)
The RF11 runs the RS11 fixed-head disk, 128 cylinders * 8 blocks per
cylinder for 1024 512-byte blocks in total. The capacity in
12-bit-word mode is likely different.
--
Tim Shoppa Email: shoppa(a)trailing-edge.com
Trailing Edge Technology WWW: http://www.trailing-edge.com/
7328 Bradley Blvd Voice: 301-767-5917
Bethesda, MD, USA 20817 Fax: 301-767-5927
I just picked up a DEC PDP-8/L cpu unit, someone had already taken it out
of the rack for me. How can i determine if I have a complete cpu? most
of the cards are present, and there are 3 cables coming from the unit,
each with a centronics connector at the end.
There is a rack of mystery DEC equipment, lots of green G series
boards, etc. At the top of the rack is an array of lights, and
I found a plastic panel that obviously was supposed to be over those
lights. I've taken a photo of the panel, hopefully someone can
identify it for me. Other stuff in the rack is on wirewrap backplanes,
and the flip chips are plugged in from the bottom, i'm guessing this
stuff goes with the 8/L cpu. http://www-users.itlabs.umn.edu/~lemay/panel.jpg
We also grabbed the top half of a teletype 33 ASR for parts, and plan to
return with a truck tomorrow for a complete Teletype 33 ASR.
There is still a complete PDP 11/20 rack system, with dectape, decpack,
and possibly other stuff in addition to the cpu unit itself. My friend
will try to rescue this, if we can borrow a pickup truck.
Other stuff out on the loading dock includes a DecScope, 2 DecWriter II,
1 DecWriter III, 1 Decprinter. I've contacted the person who is discarding
this stuff, to see if anything else is available, such as manuals or
dectape. By the way, i'm not planning to take the printers I just mentioned,
I just dont have much storage space.
Since this is the first 8/L system I've seen in person, any help in
determining if i have a complete system would be appreciated. Also,
what are those 3 centronix connectors for (connections to expansion
units in that other rack maybe?) and how can I connect a terminal
or something to make this thing a bit more usable?
-Lawrence LeMay
lemay(a)cs.umn.edu
Hi all,
I spent my lunch break finishing the configuration for the mailing list
archives. Due to underwhelming popular vote, the email addresses of
posters have been xxx'd out; if you really want your email address to
appear with your messages in the archive, you'll have to append it to your
sig.
The URL to access the archives, at this moment, is:
http://www.retrobytes.org/classiccmp/
For the moment, it is a pretty plain setup. The archive is split into
separate pages of 75 messages each (my only complaint with other archives:
it takes *way* too long to load a 500k archive list every time!) and can
be viewed as sorted by date (default page), thread, and author.
Soon enough, I hope to add a search engine and better browsing
manager...though I don't know when I'll get the time. If anone on the list
is a Glimpse expert and has a little time, I'd be happy to set you up a
login account... :)
Enjoy!
Aaron
Hi all,
I know that Kevan posted that he's working on getting his archives back
up, but a question in the meantime...
I've been thinking of making a new archive of the list available at
retrobytes.org (starting with this month); any comments/concerns/advice?
Do I have to get anyone's explicit permission to do this?
Lastly, assuming I go through with this, would people prefer that I set
Mhonarc to obfuscate everyone's email addresses? The benefit, of course,
is that a spammer's address crawler couldn't pick up everyone's addresses
>from the page like they do on newsgroups; the drawback is that people
wouldn't be able to directly contact the authors.
If the general feeling is that you'd rather the addresses be hidden,
perhaps I could create two archives...one private for classiccmp list
members to search the archives *with* addresses, and one public with the
obfuscated addresses.
As usual, any imput at all would be appreciated.
Cheers,
Aaron
Interestingly enough, I ran across an Enigma machine at a hamfest
in MD. last year. The gentleman had it on a table amidst a bunch
of WWII radio gear. I did a doubletake when I saw it (I only recognized
it because I've seen the one in the Smithsonian). It was missing the
encoder wheels, and I seem to remember that he wanted somewhere around
$7K for it. I'm pretty certain he didn't sell it, and I haven't seen
it at any hamfests since, but perhaps he'll have it there again this year.
-al-
> -----Original Message-----
> From: Hans Franke [mailto:Hans.Franke@mch20.sbs.de]
> Sent: Monday, April 03, 2000 4:12 PM
> To: classiccmp(a)classiccmp.org
> Subject: Re: One of only 3 "enigma machine" stolen; A piece
> of ENIAC was
> up for auction.
>
>
>
> > >I see it as another sign of how serious our hobby is
> becoming. Its valued
> > >at 100,000 pounds! I wonder what it will fetch on ebay? ;-)
>
> > Also sounds a bit like an April Foolsday Prank (Saturday
> was the day of the
> > crime)
>
> > Hmmm. If ever on sale at Ebay be prepared to fork out
> another 100K pounds
> > for the shipping !
>
> Why ? Do they include an U-Boot ?
>
> ;)
> Hans
>
> --
> VCF Europa am 29./30. April 2000 in Muenchen
> http://www.vintage.org/vcfe
> http://www.homecomputer.de/vcfe
>