As single-card-single-box CP/M systems went, these were about as good as any
you could get back in the lat '70's-early '80's. They were well equipped
with documentation and human support. There was a users' group which
supported them as well.
Dick
-----Original Message-----
From: Kevan Heydon <kevan(a)heydon.org>
To: Discussion re-collecting of classic computers
<classiccmp(a)u.washington.edu>
Date: Monday, March 29, 1999 6:41 AM
Subject: Superbrains in the UK.
>
>I have a lead on a couple of Superbrains available here in the UK. I am
>not interested but if anybody else is then I can pass on the details.
>
>--
>Kevan
>
>Collector of old computers: http://www.heydon.org/kevan/collection/
>
>
>
> For a quick route to the picture...
>
> http://world.std.com/~mbg/move_step00.jpg
>
> Megan Gentry
> Former RT-11 Developer
Very nice!!!
Steve Robertson -<steverob(a)hotoffice.com>
On Monday, March 29, 1999 12:17 AM, Don Maslin [SMTP:donm@cts.com] wrote:
> On Sun, 28 Mar 1999, Richard Erlacher wrote:
>
> > If you have to align an 8"drive, the alignment diskette is pretty essential,
> > i.e. you can't really do well without it. The 5.25" diskettes are about as
> > easy to manage with software and one of the "digital alignment diskettes" if
> > you can get them.
>
> I am pretty sure that they are still available from:
>
> Accurite Technologues, Inc.
> 231 Charcot Avenue
> San Jose CA 95131-1107
>
> - don
Looks like the disks are still available.
http://www.accurite.com/Products.html
Steve Robertson - <steverob(a)hotoffice.com>
I have a lead on a couple of Superbrains available here in the UK. I am
not interested but if anybody else is then I can pass on the details.
--
Kevan
Collector of old computers: http://www.heydon.org/kevan/collection/
As usual, contact the person in the post, not me... I don't have anything
to do with the machines...
- - - - -
Rainbow and DECMate fans:
Please feel free to cross-post in full to any and all interested LISTSERVS and
groups:
The Press of Atlantic City NJ is about to begin unloading its supply of
well-maintained (and heavily used) DEC Rainbows, and possibly other equipment
as well, including one or more PDP-11/84s(? the last -11 built, the
half-height equivalent of the PDP-11/70) with lots of heavy-duty port
equipment, etc.
The monitors, keyboards, and I believe power supplies, chasis components and
disk drives are identical to those used on the DECMates and some parts seem
identical to components of the earlier VT 1XX and 2XX terminals.
Final negotiations between newsroom/pressroom management, MIS and corporate
are now underway. It appears the situation will be 12 will go immediately upon
paperwork approval, with another three dozen or so, operating, plus parts, to
follow.
Tentative price for working machines with 2 floppies, no HD, a random
monochrome monitor (green, white or amber) and random keyboard (many with
special labels on keys for the editing system) and varying amounts of
memoryis $25, +packing and shipping, or $25 for direct pickup in
Pleasantville, NJ (southern NJ, about 12 miles inland from Atlantic City)
We (them of us who have used the machines and kept them alive) would prefer
seeing them used or put on display or put to use repairing DECMates rather
than scrapped.
The price for the -11s and/or their components have not been set, but they are
due to be out of service by December.
Software is a question - I believe the machines can be released with MS-DOS
3.10, but licenses for the newsroom and classified advertising systems would
probably have to be negotiated separately. While the Rainbows have passed my
personal Y2K basic complience tests (they keep running and reporting the right
date) I have not done any file creation or editing tests. MS-DOS 3.10 is NOT
supposed to be Y2K complient.
The newsroom software (I forget the vendor) and PDP-11 software in use is
reportedly NOT Y2K complient, and you wouldn't want to try to run a newspaper
off one of these systems anyway unless you're still using Linotypes.
Please post any offers to tips(a)pressplus.com and note in the first line of the
body of the message Attention: David M. Razler. I'll pass them on to the folks
doing the selling and arranging the shipping.
PLEASE - Do not respond to originating address of this message.
dmr
David M. Razler
david.razler(a)worldnet.att.net
http://www.the-dock.com/club100.html
is a good place to find info and software for the Model T (100 and the
likes). ther is also a very active mailing list where one can gather a lot
of information about the Model T (even though it seems like the Y2K is a big
issue these days) you can subscribe from the link above.
I'm not sure what a complete set is, a nice system would include the disk
drive (there were various models) a memory extension and any eripheral that
could be available.
Apparently the Model T has still a large base of users.
Francois
>Isn't there some really active Model 100 mailing list or newsgroup even?
-----Original Message-----
From: Lawrence LeMay <lemay(a)cs.umn.edu>
>Well, There were model 100, then 102, then 200. I doubt that anything
>came with it out of the box except a manual of some sort.
>
there was also a model 80
- Mike: dogas(a)leading.net
you go girls.
;)
Mike: dogas(a)leading.net
-----Original Message-----
From: Megan <mbg(a)world.std.com>
To: Discussion re-collecting of classic computers
<classiccmp(a)u.washington.edu>
Date: Sunday, March 28, 1999 7:00 PM
Subject: The move is accomplished!
>
>It's finally been done... after many weeks of talking about it and
>not having it happen, Allison and I drove up to New Hampshire this
>morning and drove back with a couple of tall (H960, 6') racks with
>the following:
>
> pdp-8/a
> pdp-8/e
> pdp-8/f
> lab-8/e
> pdp-11/34a
> vr14
> lps
> DECwriterII
> 3 RL01s
> 1 RX01
> 3 Diablo RK05-work-similar
> TU56 DECtape dual drive
>
>Funny thing... the pdp-8/e was originally Allison's... she had given
>it several years ago to the guy from whom I got all of the above...
>In return for her help, she took the pdp-8/f (smaller unit than the
>pdp-8/e), a core stack from the -8/e, and a second serial line card.
>
>I believe she is pleased... I know I am...
>
>I took pictures and hope to document the procedure at some point
>in the future...
>
>Now to get them all wired back up and tested out...
>
> Megan Gentry
> Former RT-11 Developer
>
>+--------------------------------+-------------------------------------+
>| Megan Gentry, EMT/B, PP-ASEL | Internet (work): gentry!zk3.dec.com |
>| Unix Support Engineering Group | (home): mbg!world.std.com |
>| Compaq Computer Corporation | addresses need '@' in place of '!' |
>| 110 Spitbrook Rd. ZK03-2/T43 | URL: http://world.std.com/~mbg/ |
>| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
>| (603) 884 1055 | required." - mbg |
>+--------------------------------+-------------------------------------+
>
>p.s. YIPPEE!!
>
>