I'll give a LIFETIME PASS TO THE VINTAGE COMPUTER FESTIVAL to the first
person who successfully gets me in touch with CHUCK PEDDLE of
6502/Commodore PET fame.
Sam Alternate e-mail: dastar(a)siconic.com
-------------------------------------------------------------------------------
Ever onward.
September 26 & 27...Vintage Computer Festival 2.0
See http://www.siconic.com/vcf for details!
[Last web site update: 08/25/98]
Hi Group:
Thanks to Rick Murphy, I have the answer to my query. Turns out that the
info was also on my own website, in the RX01/02 maintenance manual. I
should've looked there first!
See http://highgate.comm.sfu.ca/pdp8 for pdp-8 docs, software, and other info.
Kevin
At 11:02 PM 98/09/08 -0400, you wrote:
>At 07:37 PM 9/8/98 -0700, Kevin McQuiggin wrote:
>>Hi Group:
>>
>>Anyone have the specs for the DIP switch settings on the M8357
>>RX01/RX02 interface board? There are 8 switches in the block.
>
>Switch 7 and 8 are not connected. S1-S6 set the IOT (device code).
>
> S1 S2 S3 S4 S5 S6 S7 S8
>Normal (75) 0 1 0 1 0 1 NC NC
>Other (76) 0 0 1 1 1 0 NC NC
>
>On the RX02 M7744 module, set S1-1/S1-2 to off.
> -Rick
>
>
>
---
Kevin McQuiggin VE7ZD
mcquiggi(a)sfu.ca
I spotted this in a newsgroup - thought someone might want to contact
him about these mags. I have no connection with them or with him.
>
>Hi,
>
>I have a set of the first year+ BYTE mags from
>1975-1976. I have issue #1 (Sept. 75) complete
>through Dec. 76. Is there a market for these
>or should i just toss em? It is kinda interesting
>looking at the PC world before there were PCs
>and the evil empire did not exist.
>
>Opinions welcome,
>kbt
>
>P.S. If you email direct make sure the address is:
>
>keith.thompson(a)east.sun.com
-Bill Richman
bill_r(a)inetnebr.com
http://incolor.inetnebr.com/bill_r
(Home of the COSMAC Elf microcomputer simulator!)
Don't know if I'd actually classify this as a 'rescue', since probably the
worst that would happen would be that the gear would end up buried in my
warehouse, but...
A couple of items that could use a new home. (just cause I don't have
time to get to them at present) I won't attach a specific price to either
but would like to see either a little $$ or something interesting in trade
for them. (see the 'wish list' on my web pages for ideas)
Both items are considered to be in 'as-is' condition. I've not had time
to try to fire them up or do any check out since they came to me.
Either would need to be picked up as they are too large (&/or) heavy to be
practical to ship economically.
1) Cypher 9 track tape drive. 800/1600 bpi, 125IPS transport. Just the
drive, no cabinet.
1) DEC PDP11/84. CPU only in 4ft. cabinet suitable for mounting drive in
top bay.
Drop me a note if interested. Note: my ISP is having problems with their
dial up lines (darn US West anyway!) so my access to email is a bit
sporadic at present... So don't panic if I don't get right back to you...
-jim
---
jimw(a)agora.rdrop.com
The Computer Garage - http://www.rdrop.com/~jimw
Computer Garage Fax - (503) 646-0174
BIG TRAK
grrr, i always wanted one of those things! it had a keypad where you punched
in coordinates and then it would carry them out. it also had lazer guns which
you could also program to flash i think. there was an optional dump trailer
too. im sure you could probably find one on epay.com for serveral hundred $.
came out in the early 80's i believe.
david
In a message dated 9/8/98 10:24:37 PM Eastern Daylight Time,
sinasohn(a)ricochet.net writes:
<< There's been a few HERO's on ebay lately. (Don't ask what they sold for.)
Similarly, does anyone remember a truck-like thing (big trax?) that you
could program sorta like LOGO? I remember the commercials showed it
bringing a soda (or beer?) to one lucky owner. Unfortunately, my family's
gift budgets never would have covered such a nifty gadget... 8^( >>
At 08:07 8/09/98 PDT, Max Eskin <maxeskin(a)hotmail.com> wrote:
>Well, the C64 had a schematic in the reference manual, as did the
>Apple ][. I would be willing to photocopy either.
If you're after schematics for Commodore micros, check out
http://www.funet.fi/pub/cbm/schematics/index.html
There are schematics for the C128, C64, VIC-20, Plus-4, PET2001, PET8032,
KIM-1 and various peripherals such as floppy disk drives, printers,
datasettes, etc.
Regards,
| Scott McLauchlan |"Sometimes the need to mess with their heads |
| Client Services Division| outweighs the millstone of humiliation." |
| University of Canberra |___________Fox_Mulder_"The_X-Files:_Squeeze"_|
|scott(a)cts.canberra.edu.au| http://www.canberra.edu.au/~scott/home.html |
I must comment that the real distinction is how they are marketed.
Earlier, the size of the machine denoted its power and utility. Now,
it's not possible to classify as easily. Plus, hardware gets outmoded
so quickly, it's not likely for anyone to buy a 'mainframe' these
days. PCs are pretty disposable now. Tony's rules are adequate, as
these distinctions closely mirror the target market of the machine.
>> mainframes? The minis are getting small(take a look at the AS/400
line,
>> about the size a a PC server for the smaller models), and you can
even fit
>> a miniature version of a S/370 into a PC(actually in two ways, IBM
has a
>> PCI card and I seem to remember a software emulator from
somewhere)...
>
>The rule I use is simple :
>
>If the CPU is one chip (like a Z80, or a pentium) or a chipset that's
>always used together to make that CPU (like a F11, or the early IBM
6000
>CPU) -> It's a micro
>
>If the CPU is a lot of standard chips (gates, flip-flops, ALUs,
bit-slice
>stuff), and it fits into at most a couple of 6' racks -> it's a mini
>
>If the CPU takes up most of the room -> it's a mainfame.
>
>If it meets the 3M critera (Megabyte, Megapixel, Mips) -> it's a
workstation.
>
>Now, this leads to some interesting ones. By that definition, a
PDP11/23
>is a micro. But a PDP11/34 is a mini. The 370-on-a-card is probably
also
>a micro.
>
>Note that 'workstation' says nothing about the CPU. I'd claim a Sun3 is
a
>worktation _and_ a micro. A PERQ 2 is a workstation and a mini.
>
>Those definitions aren't perfect, but they seem to work for me.
>
>-tony
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
< Oh boy, taxonomy again! OK, here's my stab:
<
< Microprocessor: a single-chip CPU.
What if the cpu is multiple chips aka LSI-11?
< Microcomputer: a computer based on a single microprocessor.
What if there are several performing different tasks in the same box.
< Workstation: a computer designed to run Unix with a bitmapped display.
What if it's a VAX running VMS? Yes the VS3100s were definatly
workststions.
< Minicomputer: a timesharing computer that can support fewer than 100
< simultaneous users.
VAX and minicomputer that could and often did have more than 100 users.
< Mainframe: a timesharing computer than can support 100 or more users
< simultaneously.
Generally big iron and most that had that distinction where physically
large. AKA univac 1180.
< and some finer grain classes:
<
....
< Embedded computer: a computer that requires cross-development in order t
< reprogram.
Maybe, or it can be a single board computer installed into a dedicated
application. Generally term embedded means dedicated to a task(or set of
tasks). One possible embedded machine is a national Nibble Basic or
intel 8052ah (basic or forth) chip with a keyboard, LCD and EEPROM.
Allison
At 07:37 PM 9/3/98 -0500, you wrote:
>Finding old characters like Chris Crawford? Sheesh, doesn't anyone
>try a web search (via www.hotbot.com, etc.) before asking a question
Whups, sorry. I was just sort of reminiscing, while replying, not really
thinking. Besides, I'm currently running windoze, and can't load Eudora
and Netscape at the same time.
>of the endlessly patient oracle known as this mailing list? Crawford
>is still quite active as an old wise man in the gaming industry.
I'll check it out -- Thanks!
--------------------------------------------------------------------- O-
Uncle Roger "There is pleasure pure in being mad
roger(a)sinasohn.com that none but madmen know."
Roger Louis Sinasohn & Associates
San Francisco, California http://www.sinasohn.com/