>Is that the same as the PC and the PS/2 keyboards? Those things are
>terribly noisy, they give me a headache. I like the click, but it has a
>high-pitched overtone.
It does? I have an old PS/2 keyboard connected to my P200, and never
noticed anything high-pitched. The space bar is a bit louder then the rest
of the keys, and there's an occasional *sproing* from a stuck spring in a
few of the keys. Other than that, it's a great keyboard. The PC keyboard
is another good one. They both give the sure feel that a letter is going to
come onto the screen (usually), unlike the new membrane (squishy-key)
keyboards that almost have the feel of the Coco 2 keyboard.
The only time that I would think the clicking would give someone a headache
would be if they were locked in a sound-proof round all-white room with no
windows, and dome ceiling, but then again, that's just my opinion.
--
-Jason Willgruber
(roblwill(a)usaor.net)
ICQ#: 1730318
<http://members.tripod.com/general_1>
I know that this is an old question, but I've been on
vacation. And I'm just catching up on the last two weeks.
SUPRDAVE(a)aol.com said:
>i was talking to my manager who is just about ready to give me a complete and
>working trs80 model 1 with ALL accessories. he also said he used something
>called a stringy floppy with it which used a loop of string/wire to save
data
>with not quite the speed of floppies but certainly faster than cassette. has
>anyone seen these or can explain how they work? he said there were carts that
>were put into the drive so it seems to be a removeable media device? can
>anyone explain further?
I have one and some information in my Lobby display case.
http://www.best.com/~dcoward/museum/display.htm
=========================================
Doug Coward
Press Start Inc.
Sunnyvale,CA
=========================================
> On Tuesday, November 24, 1998 2:48 PM, Ethan Dicks wrote:
> The Elf99 will consist of the following:
Count me in for one!
> Did I miss anything?
Don't forget the 'Q' LED. ;-)
> Any other suggestions? I will not be including space
> for an 1861 because I have been entirely unable to locate a source.
This means no CHIP-8. :-(
Al McCann
amc358(a)interserv.com
>>Yes. On every DEC drive I own (and I guess most others), track 0 is at
>>the outside edge of the disk and the highest track is closest to the
>>spindle. Allison/Tim will now post a list of exceptions :-)
>
>Only exception I know of is CD-ROM, which doesn't exactly have tracks,
>but at least block 0 is on the inside and the higher-number blocks
>are on the outside.
I seem to remember something about the RD series disks (or at least the
RD52 or RD53) installed in a PRO-series machine having the outermost
track *not* track zero...
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | Internet (work): gentry!zk3.dec.com |
| Unix Support Engineering Group | (home): mbg!world.std.com |
| Compaq Computer Corporation | addresses need '@' in place of '!' |
| 110 Spitbrook Rd. ZK03-2/T43 | URL: http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 | required." - mbg |
+--------------------------------+-------------------------------------+
At 02:47 PM 11/24/98 -0500, ethan wrote:
> I am cranking along with the capture of the Elf99 design (on OrCAD
> for DOS, a 10-year-old program, no less). I wanted to throw out what
> I have descided on and ask for suggestions on what is not set in
> stone.
All the basic stuff sounds fine to me.
> Options under consideration:
>
> o Sockets for two 1822/2101 256x4 SRAMs, the same style used by
> the original Elf.
I'd like that.
PIO and UART would be extremely useful, probably more so than the
prototyping area -- at least, to me.
> o A pre-programmed 27256 with a "library" of simple programs
That's a good idea.
> Do we still have any interested parties?
Yes :-)
--
Pete Peter Turnbull
Dept. of Computer Science
University of York
Relatively NEWER stuff - but you never know......
> Sure post it but please include a note that the items will have to be
> picked up the week of Nov 30th - December 4th. Thanks
> Amy
>>---------- Forwarded message ----------
>>Date: Mon, 23 Nov 1998 10:05:15 -0600
>>From: Amy Bryant <abryant(a)hamiltongrp.com>
>>To: danjo(a)xnet.com
>>Subject: salvage hardware
>>
>> I saw your name on the Internet as someone who is interested in older
>> computer parts for free. I have 4 AST docking stations (no laptops)
>> going in the trash unless I can find someone to come take them away.
>> Also included box of parts with older hubs, bernoulli box, 5.5 " disk
>> drives, keyboards, and lots of other stuff.
>> We are located in the near north area just north of the loop.
>> Please reply if you are interested.
>> Thank you.
>> Going soon....
>>******************************************
>>Amy Bryant 312.642.1825
>>Hamilton Communications Group
>>ABRYANT(a)HAMILTONGRP.COM
>>******************************************
BC
Hello, all:
I'd like to start playing with the Motorola Educational Board that I got
a few months back. I downloaded Xinu, a multitasking OS designed for it (and
the dubject of several books). But, I'm having a devil of a time finding
info on the hardware itself.
Amazon has a book on it, but it's out of print. The book is "68000
Microcomputer Experiments: Using the Motorola Educationa Computer Board"
Maybe someone has a pointer to schematics? Anything would be helpful.
Thanks.
[ Rich Cini/WUGNET
[ ClubWin!/CW7
[ MCP Windows 95/Windows Networking
[ Collector of "classic" computers
[ http://highgate.comm.sfu.ca/~rcini/classiccmp/
[ http://highgate.comm.sfu.ca/~rcini/pdp11/
<================ reply separator =================>
Hello, all:
Here's what was posted to the secure area of my Web site:
- Altair article scans: parts 1-3 and 10
What remains is parts 4 through 9.
[ Rich Cini/WUGNET
[ ClubWin!/CW7
[ MCP Windows 95/Windows Networking
[ Collector of "classic" computers
[ http://highgate.comm.sfu.ca/~rcini/classiccmp/
[ http://highgate.comm.sfu.ca/~rcini/pdp11/
<================ reply separator =================>
< < o A protoyping area of .1" spaced plated-through holes, nominally
< < a few inches long by one or two inches wide.
A thought, Since holes cost...
Reduce that to several lines of holes on .1 ctenters with .3 spacing
between lines. That will accept dips in the .3(std parts) and .6
for the wide parts.
Allison