www.eden.com/~arena/jagshouse/
previously, he had over 50 meg worth of old mac apps online, but had to remove
them due to obvious copyright reasons. thankfully i was able to pull copies
down in time. he still has info on internetting an old mac.
In a message dated 11/25/98 6:19:17 AM Pacific Standard Time,
jruschme(a)exit109.com writes:
<< > Does anyone have any drawing software that"ll run on it that they'd be
> willing to send me?
Me, no, but I think someone else mentioned MacCrypt. Also, lok for a site
run by a guy named Jag. >>
Hi,
In case anyone is interested (and has loads of space and a large truck),
apparently Cray Y-MP-EL and Convex mainframe computers are part of an auction
to be held on 8th December near Honiton, Devon, England. The URL of the
auctioneers is http://www.saqnet.co.uk/users/mstcommercial
If anyone decides to go to this, please let me know (I may want to scrounge a
lift off you...).
-- Mark
On Sun, 22 Nov 1998 Gareth Knight wrote:
>Marvin wrote:
>>Having *finally* gotten a CD-R unit hooked up, it occurred to me that
>>perhaps recording all the cassette data tapes to CD would be a worthwhile
>>thing to do. Has anyone else tried this? I would think it would be
>trivial
>>to hook up a stereo to computers, and thus load both data and programs.
>
>You mean record the audio on to a different track? Yes, it certainly is
>possible. There was a commercial device out for the Sinclair Spectrum in
>1990 that included 30 games on one CD. I think it was made by Codemasters.
>I've only seen it once at a car boot sale but it appeared to be a basic to
>be a basic CD player with some leads to plug into the tape port.
That's what I understand it consists of. A very high speed turbo-loading
routine is used; tapes would have trouble coping with this. The first track is
probably a normal-speed file containing the loader code, and the other tracks
would be the games recorded at high speed. (Can anyone confirm this?)
I have many old computer cassettes, and have been thinking of recording them
onto a computer in order to preserve their contents. The signal from computer
tapes oscillates between two levels, right? This being the case, it should be
possible to record them using 1-bit sampling. Perhaps record with 8- or 16-bit
sampling and then convert down to single bit.
Are there any programs to do this conversion? I imagine the equivalent of a
Schmitt trigger (in software) would work. What about playing back a 1-bit
audio signal? Are there any standard audio file formats that can be used to
store 1-bit data?
The final 1-bit audio files should be highly compressible, so they could be
archived with zip etc. to reduce size.
If sampling at 44.1kHz, the uncompressed 1-bit sample would use about 5.4K per
second. For a five-minute tape, that comes to under 1.7MB. Sampling is of
course the best way to preserve software, rather than converting the files
themselves; with a sample an exact duplicate of the original cassette can be
created, and things like copy-protection and turbo loaders are no problem.
Actually recording tapes to audio CDs is quite wasteful since you can only get
70 minutes or so on a CD (an issue if you have hundreds of cassettes). My
approach would be to archive tapes as described above; of course burning an
audio CD is useful for transferring the data back to the source computer.
-- Mark
>I went to a scrap place yesterday and found a couple of interesting items.
>One is a 16K core memory board for a Data General Nova. Huge sucker! It's
>marked "DATA GENERAL CORP DGC NOVA 800 16K MEMORY STACK copyright 1973".
>Anyone need this or should I just hang it on the wall to admire?
Someone with a Nova could want it :-)
> I also found several odd looking boxs that are labled as HDS ViewStation.
>they're made by a company called Human Designed Systems. They're about 2"
>tall and 12" square. They have connectors for all the following; thick and
>thin ethernet, twisted pair, sun keyboard, standard PC keyboard, RJ serial
>port, DB-25 serial, DB-25 parallel, PS-2 mouse and standard VGA video.
>Does anyone know what these are
Very versatile terminals. Plug in a monitor, plug in a keyboard, you have
a terminal over the DB25 or RJ serial connector. Plug in the Ethernet, you
have TCP/IP and LAT connectivity. I believe that certain models were also
X-terminals (though I never used any as such.)
> or why they have so many ports?
So you can hook up whichever keyboard, printer, and computer however
you find most convenient. :-)
Tim.
Hi,
Funny you had to post this today, I just bought two MAC SE without hard
drives. May be we could work out a deal here.
Francois
-------------------------------------------------------------
Visit the desperately in need of update
Sanctuary at: http://www.pclink.com/fauradon/
-----Original Message-----
From: Phil Clayton <handyman(a)sprintmail.com>
To: Discussion re-collecting of classic computers
<classiccmp(a)u.washington.edu>
Date: Monday, November 23, 1998 12:58 PM
Subject: Apple Mac External Hard Drives For Sale
>I have two External Apple Mac SCSI Hard Drives that I no longer need..
>They were used on my Mac SE computer..
>They plug into the back of your Mac, and I suppose could be used in an
>Apple II series computer if it had a SCSI interface card installed..
>Those interested please make me an offer on one or both of them..
>
>1. MacDirect 120MB SCSI Hard Drive with SCSI Cable & Power Cord..
>2. CMS 60MB SCSI Hard Drive with SCSI Cable & Power Cord..
>
>Both of these units work fine no errors..
>Both are formatted for Mac SE and boot to system ver 7.1
>Both have several Misl programs on them..
>Both are very clean units, well taken care of..
>Designed to sit under the Mac, and cosmetically match..
>
>Those interested contact me privately at handyman(a)sprintmail.com
>Thanks...
>Phil...
>
Hi!
I have a Mac Portable with 4 MB RAM, 2400 modem, 40MB HDD, running System
7.01 Pro.
Does anyone have any drawing software that"ll run on it that they'd be
willing to send me?
I'm also looking for a small web browser and TCP/IP dialer program for it.
Are there any MIDI players for the Mac (like a Windows MediaPlayer)?
What format are the sounds on a Mac, where do I get them (the Portable has
no input, so I can't record anything), and how do I play them ? If there is
an audio player for MacOS, where do I find one?
I also have a few questions:
- Just how rare are the models with the factory-installed backlight? I've
heard that they're fairly rare, and the non-backlit versions are much more
common.
-Is there any possible way to fit a bigger HD into it? I've been told that
the HD is a special type, and other ones won't work.
ThAnX,
--
-Jason Willgruber
(roblwill(a)usaor.net)
ICQ#: 1730318
<http://members.tripod.com/general_1>
PS>> Please ignore the fact that some of these questions may be pretty
basic, but the Portable is the first Apple I've had since a //c.
< Options under consideration:
<
< o Sockets for two 1822/2101 256x4 SRAMs, the same style used by
< the original Elf.
<
one 2116 outweighs that.
<o A 1851 programmable input/output port -or- a pair of 4508 latches
Use the one that is available.
< wired as one input and one output port (as in the COSMAC VIP)
Handy and useful, do the ports.
< o A 1854 UART
Desirable.
< o A protoyping area of .1" spaced plated-through holes, nominally
< a few inches long by one or two inches wide.
<
< o Either a dual 4042 address latch or a single 4508 latch. One or
< the other is needed to implement more than 256 bytes of memory.
< This would be optional in a machine built with dual-256x4 SRAMs.
Consider 74hct373.
< o A pre-programmed 27256 with a "library" of simple programs
< (Accessible by enabling the ROM switch, setting the program
< number in the switch register, then setting the control switches
< to "run").
Good idea! I have sources for minimonitor and UT4(RCA) plus a buch of
others in hex from articles.
< Did I miss anything? Any other suggestions? I will not be including sp
< for an 1861 because I have been entirely unable to locate a source.
Long gone.
< Do we still have any interested parties? I have saved the addresses of
< all who have initially expressed interest, so I only really need to know
< these features are attracting people or putting them off.
Yes!
Allison
> Aaron Christopher Finney <A_Finney(a)wfi-inc.com> wrote:
>
> I finally got an ATR8000. Man, I dreamed of having one of these every
> night, reading the SWP brochure until it literally fell apart. Every time
> I went to buy one on ePay, someone would come along and push the price
> *way* beyond what I wanted to pay. Anyway, I just got one for $60 (I know
> many of you think that's still ridiculously high, but I've been waiting
> ~12 years for one of these things) that came with a giant stack of disks,
> manuals, and cables. The usual CP/M stuff; Wordstar, Supercalc, etc.
> Unfortunately, I'm at work and have to wait a few hours before I can try
> it out.
>
> Well, at least now I will stop harrassing everyone who posts to the list
> about picking one of these things up for $5...
>
How about the ATR Co-Power II? The one I found recently has an 8088 and
256K RAM, so I presume it was intended let an Atari run MSDOS. It looks
like it dates from around 1984. Can you comment a bit more on the history
of these ATR second processor cards and do you happen to know how many
different types they eventually made?
Arlen Michaels amichael(a)nortel.ca
Saw this in comp.sys.dec, so I thought I'd post it in the list for
interested parties.
I'd LOVE to get the 11/750, but I'm a little too far away......
-----Original Message-----
From: kshuff <kshuff(a)fast.net>
Newsgroups: comp.sys.dec
Date: Wednesday, 25 November 1998 13:45
Subject: Some DEC stuff still available
> I still have the following stuff I'd like to see go to good homes, prices
are
>negotiable and do not include shipping...
>
> VT1200 Mono X-term base, 3 meg ram, no keyboard or mouse $25 OBO. Can
throw
> in a DEC VR260 mono monitor for an extra $25
>
> VAXstation 3100 M38, 24 meg ram, RZ23, RZ24, SCSI floppy, keyboard, mouse,
> VR262 mono monitor, external TK50, Ultrix 4.4 installed $200 OBO
>
> VAX 11/750, 8 meg ram, DMF32, TU-80, TU58, (2) boxes of spare Unibus
cards,
> all original console TU58 tapes and diagnostics, original Ultrix 3.1 on
> 9-track magtape, older VMS on magtape, manuals, printset BEST OFFER,
> MUST PICKUP in Eastern Pa. It does work :)
>
> Spare TU-80 9-track tape drive, bare unit, no cabinet BEST OFFER
>
> HP7475A Plotter, brand new color pens $45 OBO
>
>All items located in Allentown, Pennsylvania, in good and working
condition.
>
>
>
>
> Keith S. Huff
>
> kshuff(a)fast.net
> ---------------
>
> "One World, One Web, One Program"- Microsoft Promotional Ad
> "Ein Volk, Ein Reich, Ein Fuhrer"- Adolf Hitler
Cheers
Geoff Roberts
Computer Systems Manager
Saint Marks College
Port Pirie South Australia.
My ICQ# is 1970476
Ph. 61-411-623-978 (Mobile)
61-8-8633-0619 (Home)
61-8-8633-8834 (Work-Direct)
61-8-8633-0104 (Fax)
