Marvin,
<I figured they were probably for the LSI-11 but beyond that, I didn't
<have a clue. I have several PDP computers including the 8i, 05, and
<23. Are these similar to the paper tape diagnostics for the PDP 8?
They are not like the PDP-8 tapes, though some similarity may exist.
They would be usable for the 23 if it has rx02.
<Also, is the disk format such that they have to be read on a DEC
<computer or can they be read on other machines? Thanks!
The dydp are RX02 so the answer is directly, no. if it was a dxdp set the
answer is yes as that would be RX01 (standard single density 8"). They can
be transfered to rx01(or tu58, rl01/2, rk05, magtape) and made bootable.
so if you have a working PDP-11 (most any) with RX02 you can make them rx01
and then readable by other systems, executeable is another matter as they
are written in PDP-11 code.
Allison
At 08:20 AM 8/7/97 -0500, Bill Girnius wrote:
>I recently aquired a 1040 STf, what's the deal with the f designator,
>anyone know? Im still workin on finding a monitor.
>
>----------
Bill,
STF means ST+internal _F_loppy drive. There is a good web page
with a bunch of ST stats and info at:
http://www.users.zetnet.co.uk/aseabrook/a_models.htm
Isaac Davis | Don't throw out that old computer,
idavis(a)comland.com | check out the Classic Computer Rescue List -
indavis(a)juno.com | http://www.comland.com/~idavis/classic/classic.html
Hi again. :) I can't add much, as I only recently started looking into
Atari history, but the 800xe was released in 1985, and the portfolio, if
you choose to include it, in 1988.
Hope it helps a bit,
Adam.
i traded my brother a ncr mca box for something called a grid compass ][
1129. it's a quite large laptop with what seems to be in a metal <!> case
and a 3.5x5 inch screen. it also has an access door with 4 roms installed;
gridrom 3.1.5 write/term/format, gridrom 3.1.0 grid-os system, gridmail
103.2.2 and gridos utility rom, 3.1.0 the machine works, but only from ac
power. it also has a screen saver with bouncing balls! =D my brother says
he got it from a guy who worked in the aerospace industry who said this
machine was supposedly used to compute some kind of vectors or something or
other for the space shuttle program back in the 80's although i have no way
of quantifying that. on the back of the machine there is a proprietary serial
connector and phone jacks and something called a GPIB port; can anyone say
what that is? i'm still trying to figure out the preloaded apps, but i've
stumbled upon a passwoid option which i may have to hack through. i welcome
any info or opinions on this beast. it's esoteric enough to keep in my
collection.
david
>There is what appears to be an RC clock composed of a 4.7 nF capacitor and
>a multi-turn trimmer potentiometer in the upper left corner of the M7260
>data path board in my 11/10. It looks like this clock feeds a 74197
>counter, which has a 5-position rotary switch connected (presumably for
>selecting what the incoming clock is divided by). I'll put a scope on pin
>40 of the UART after I power the machine up to see what effect the rotary
>switch has on the UART clock. It seems likely that the rotary switch is
>used for making large changes in the baud rate and the trimmer is used for
>tweaking.
If that's the board I think it is, it's an 11/10S. The preset was adjusted at
the factory, and you could set most standard baud rates using the switch. It
can't hurt to measure the frequency, of course.
I can check the printset next weekend for you if you can't figure it out.
>
>--
>Scott Ware s-ware(a)nwu.edu
-tony
On 05-Aug-97, Allison J Parent wrote:
>odd sounding box. The BA23 is a 6"x19"x29" chassis out of the plastic dress
>case. The BA123 is about double the width but the layout is very different.
>The backplane is fixed in a main chassin and has a door over it and dress
>covers. Sounds like a either a bs23 or BA213 skunk box. Most ba23s only
>have one hard drive and either RX50 or TK50/70 tape.
This one is in a plastic case mounted on a pedestal..the cases outside
dimensions are: 6"W x 28-1/4" L x 24" H. The dimensions of the internal
chasis alone are approximately: 5"W x 24" L x 17-1/2" H. It certainly doesn't
sound wide enough to be a BA123, which threw me off at first when Tim
suggested that's what it was. It doesn't seem to match the dimensions of the
BA23 though either, especially since it has two slide-mounted hard disks in
it, though it lacks a tape drive or any other type of removable media.
>FYI the BA23 (Ihave one) slides into a plastic pedestal case from the back.
>or the metal box can have rack mount ears.
This one also alows the whole chasis to slide in and out of the pedestal
case...and it looks like it'd allow it to do it just as easily from the front
as it would the rear.
>The 6x6 card? got me. A KA630a is quad width double height (8.5x11).
Well my guaging of dimensions by eye leaves much to be desired..which is
why I took a seamstress tape to the case for the above dimensions!
>If the OS is ultrix yes, VMS no. If the case is BA23 drve ready switches
>should be off before turning on and off before turning off. I'd say don't
>power it till you have a terminal anyhow as VAXen look for a console
>terminal or they don't finish power diags or boot! It also queries the
>terminal for what It is, the altos unless a vt100 clone will nto give the
>right response (no biggie but there is some console editing that will not
>happen then).
I'll keep an eye out for a VT-100 or such then....it doesnt look likely
I'll find a keyboard for the Altos anyhow. I think I've seen VT-100's for
about $50 on the newsgroups.
Jeff
--
----------------------------------------------------------------------------
Amiga enthusiast and collector of early, classic microcomputers
http://www.geocities.com/siliconvalley/lakes/6757
Marvin <marvin(a)rain.org> wrote:
>> There are over 800 machines with unknown dates, would the list members
>> be upset if I do a weekly posting of, say 10 names in an attempt to
>> get
>> more info? If you do object send me Email and I will stop.
> This sounds like a good idea as well as one that is appropriate for this
> group! Are you looking for the date that the computers first shipped or
> perhaps rather advertised that they would ship :)?
Thanks for the encouragement!
Yes, the date of a machine is a problem, ideally, for mainframes I would
like the date of running the first significant program. I have taken to
using the date of publication of an announcemnt in for example IEEE
Computer. Any reasonable and hopefully verifiable date would be
welcomed.
I have been browsing the back issues of PCW magazine of which I have a
complete set of the first 8 years or so, and it is amusing to see the
adverts for the Sinclair MK14, they start out as rough drawings, then
more detailed ones and finally after 8 or so months we finally see a
photograph. It would be interesting to see a the sequence of these ads
juxtaposed, hmmm, yet another project ;-)
Regards,
Hans
I have updated my opus magnus : the Comprehensive Computer Catalogue
(CCC), it now records 3574 computers. Please take a look and send any
comments or updates my way. It can be found at
<http://www.digiweb.com/~hansp/ccc>
Use the FIND button to gain access to the search engine, from there you
can look for your favorite machine by name or get a list of machines by
manufacturer or date or country.
There are over 800 machines with unknown dates, would the list members
be upset if I do a weekly posting of, say 10 names in an attempt to get
more info? If you do object send me Email and I will stop.
Best regards,
Hans B Pufal
I was pleased to recieve this today after quite a few emails. I can't
think a batter way to say why I joined the Classic Computer Rescue
List/Squad.
>Brett-
>
> Well, you're off the hook: I won't be trying to lure you out here for
> computer rescues this time! (which is probably a good thing, with the
> travel schedule you're looking at. . .)
>
> Anyway, my contact in western Michigan reappeared, and over the weekend
> we did a complete hand over of *lots* of stuff. Now there's a family in
> Kent City, Michigan, with a really good start on a full set of early
> Zenith machines-- and there's one in Ann Arbor that has a lot more space
> opened up in the basement (definitely what I call a win-win situation
> :-)
>
> I do thank you, though, for the initial rescue, as well as the later
> info and encouragement. Much appreciated! All the best -- Laura
We do meet some of the Nicest People in the world.
BC
An opportunity for a rescue in the Chicago area...
-jim
---
jimw(a)agora.rdrop.com
The Computer Garage - http://www.rdrop.com/~jimw
Computer Garage Fax - (503) 646-0174
---------- Forwarded message ----------
Date: Tue, 05 Aug 1997 21:26:55 -0500
From: Keith McMillen <kmac(a)mmwg.com>
To: jimw(a)agora.rdrop.com
Subject: Heathkit machines
Jim,
I have an H-8 with dual floppy drives, and an H-89 (H-8 built
into an H-19 terminal) with the built in floppy, plus an additional
dual floppy drive setup.
There are also a large box of floppies including CPM and the
HDOS operating disks.
I have no idea how much of this works anymore, but it was
functioning when I put it on the shelf. We are moving and I can't
take it with. If you can find a home for it, I would be very
pleased.
The machines are currently in the western suburbs of Chicago,
IL. You may contact me at kmac(a)mmwg.com or call (630) 832-1990.
KMAC
