test-drb October 1997

test-drb@ccmp.vtda.org

117 participants
323 discussions

by dlw＠neosoft.com

I just passing this along, can anyone help him repair his drives? Reply to him, Loufer(a)aol.com, not me. Thanks. ------- Forwarded Message Follows ------- Date: Thu, 2 Oct 1997 23:24:51 -0700 To: dlw(a)neosoft.com From: Loufer(a)aol.com Subject: http://www.neosoft.com/~dlw/comp/comphave.htmlCromemco Z2D Dave, I have an entire Cromemco Z2D system that I purchased at an auction several years ago. It was completely disassembled, and was noted as 'computer junk' and sold as a lot. Assembled, it had two monitors, two 5-1/4 drives, two 8" (wood cabinet) drives and many extra S100 cards. There's an analog-digital IO card, 3 64K mem, 6 16K mem, Dazzler (still new and unassembled), set of joysticks, and other misc hardware. Although I'm not interested in selling it (it WAS my first computer after all), but I sure could use some help finding someone to repair one of the paired 8 inch PerSci drives. Michael --------------- End of Forwarded Message ----------- ----- David Williams - Computer Packrat dlw(a)neosoft.com http://www.neosoft.com/~dlw

27 years, 2 months

HP 9100 programming questions

by fmc＠reanimators.org

Tony Duell <ard(a)odin.phy.bris.ac.uk> wrote: > Have you tried pulling out the quick-ref card at the front? Assuming it's > still there (which it should be - it's not easy to remove), it will list > all the programming instructions. I completely missed this. Thanks for pointing it out. <gulp> I think I am going to have to turn in my Master of the Obvious card for this. > I think so. The idea of -ve program steps seems to be in the back of my > mind, but that may have been fast gotos (like the 67, etc) or something. Yes. There are two banks of memory on the 9100B, + and -. > No. The opcodes aren't really related to the key layout IIRC. They are > listed on that pull-out card, though. Yes they are. > > Can I use the STEP PRGM key to single-step forward non-destructively > > in program mode? How can I move backward, or to a given location in > > program mode? > > I think so, but could somebody else confirm this before you wipe you're > program... It's on the quick-ref card. This works as I expected. If I want to go back or go to an absolute location, I have to switch to RUN mode and do a GOTO from there, then switch back to PROGRAM mode. -Frank McConnell

27 years, 2 months

HP 9100 programming questions

by fmc＠reanimators.org

Howdy, I am fooling with a 9100B calculator that used to be on exhibit, I'm guessing in the electronics museum that used to be at Foothill College. Toward that end it was hacked: a plexiglas strip was screwed to it above the switches, with cutouts for the switch handles that only let you move the power switch -- program/run, fixed/floating, and degrees/radians were all stuck on run, fixed, radians respectively. Well, I've removed that because I want to find out what if any programs were in its memory (core remembers things long after they're better forgotten), and so I want to flip the program/run switch over to PROGRAM. But I'm a little confused about the 9100's program mode, and unfortunately I don't have the manuals handy. When I flip the switch to PROGRAM, the display changes to what I am guessing is this: <step> <instruction> <Y mantissa> <Y exponent> <X mantissa> <X exponent> <step> seems to be represented as <hex digit>.<hex digit>. True? (And does this mean there are only 256 program steps?) Are <instruction> values 00-09 the keypad switches 0-9, and others in <column><row> form? And if so, where's <0><0> for the <column><row> form? Can I use the STEP PRGM key to single-step forward non-destructively in program mode? How can I move backward, or to a given location in program mode? Can y'all tell I'm spoiled rotten from having learned programmable calculators about 15 years later? -Frank McConnell

27 years, 2 months

Apple II hard drive??

by bpvh＠primenet.com

A non-text attachment was scrubbed... Name: not available Type: text Size: 1593 bytes Desc: not available Url : http://www.classiccmp.org/pipermail/cctalk/attachments/19971002/89d3faa8/at…

27 years, 2 months

DEC-10 comparative power

by dseagrav＠bsdserver.tek-star.net

About how fast is a DECsystem-ten compared to a Pentium or something? A friend and I got into a "whose computer is faster" fight. I have the 11/23, he has a Vaxserver 3100. I have the 44, he has his Pentium/something.(133 or 150?). I have a shell into a DEC-10, does that beat him, or do I lose? (I think it does, does anyone have the numbers?)

27 years, 2 months

HP-150 disks...

by manney＠nwohio.com

If any is a DOS disk, there was a post recently... bcumming(a)mail.island.net wants DOS 3.2 or might be interested in some disks. manney >I just picked up 34 'Hewlett Packard 150' diskettes; except for one >they are all user labeled (Well I THINK they are all HP-150 disks, the >disk type and labeling are very similar.) I am not certain if the 150 >is in the "Classic" arena but I am assuming so by a pic I found on the >web, if not sorry on printing an off-topic post. > > So, if there is anyone here that is interested in 34 assorted HP-150 >disks, lemme know. > > Larry Anderson >-- >-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- > Visit our web page at: http://www.goldrush.com/~foxnhare/ >Call our BBS (Silicon Realms BBS 300-2400 baud) at: (209) 754-1363 >-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- > > >

27 years, 2 months

Advanced Integration Research Motherboard

by manney＠nwohio.com

Normally, 486 motherboards are set entirely in the CMOS setup program. Jumpers, etc. typically control speed and processor type. Are you having trouble getting it to come up? manney(a)nwohio.com >I have a 486lc motherboard and need to know about any of the settings >(i.e. jumpers and dip switch) and what the memory config is. thanks

27 years, 2 months

New update on Comprehensive Computer Catalogue

by hans1＠filan00.grenoble.hp.com

Today I place the new version of the CCC online. Now listing 3806 computers. In this revision I have set up the infra structure to link each system to its own page. The intent is to provide information and links for each system. See the entry for the Sperry SPEEDAC computer. BTW anyone heard of the ULTRAMAC computer built in the mid fifties? -- Hans B. Pufal : <mailto:hansp@digiweb.com> Comprehensive Computer Catalogue : <http://www.digiweb.com/~hansp/ccc/> _-_-__-___--_-____-_--_-_-____--_---_-_---_--__--_--_--____---_--_--__--_

27 years, 2 months

HP-150 disks...

by adam＠merlin.net.au

>It could make "Classic" tenuously on either one and, given both, has NO >problem. Now -- what I keep wondering about is an Atari Portfolio (1989).... I have added it to my web site, based on a) being obsolete, b) being a new concept for its time (first MS-DOS palmtop?), and, of course, c) being really keen. Anyway, 1989 is even starting to get old in computing terms. Adam.

27 years, 2 months

[Fwd: Paper tape reader in Seattle anyone?]

by hans1＠filan00.grenoble.hp.com

Found on Usenet, can anyone help out? -- Hans B. Pufal : <mailto:hansp@digiweb.com> Comprehensive Computer Catalogue : <http://www.digiweb.com/~hansp/ccc/> _-_-__-___--_-____-_--_-_-____--_---_-_---_--__--_--_--____---_--_--__--_

27 years, 2 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb October 1997