7 Dec
2018
7 Dec
'18
8:04 a.m.
Several years ago when I restored my 8/M, I whipped up
a quick and dirty program that uses TCL/Tk to make a
little graphical interface for selecting, reading, and punching
paper tape images. When running, it looks something
like this:
https://www.cs.drexel.edu/~bls96/museum/asrscreen.jpg
You need the P9P (Plan9 from user space) libraries installed
to build it, but I could whip up a binary for you if you'd like
to try it out. I typically run it in a shell script that looks like:
#!/bin/sh
xterm -vb -sb -geom +180+10 -fg '#D0D0FF' -bg black -e asr33 $*
BLS
--------------------------------------------
On Fri, 12/7/18, Rod G8DGR via cctalk <cctalk at classiccmp.org> wrote:
Subject: PDP-8/e
To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at
classiccmp.org>
Date: Friday, December 7, 2018, 4:59 AM
Hi All
? Seasons Greetings..
My PDP-8/e was long due for a major
overhaul.
1. So everything out
2. Big Hoover job on the Omnibus
3. Bring up on Variac ? No smoke
4. Check? PSU volts. ? All OK
5. Power off
6. Install minimal System ? Front
Panel, Three CPU cards, RFI shield,? 4k Core and Bus
term.
7. Yup all looks in right order
8. Power on
9. Toggle in standard AC count up
program
10. Clear + Cont
11. And they are racing at
Rockingham!!
12. Yup counts up just like it should.
13. Let it run for a while.
14. All stop.
15. PSU off
16. Inset Async Card (Its 110 baud
only)
17. Fire up VT100. Beep - yup its
alive.
18. Toggle in keyboard echo test.
19. Clear + Cont ? Program runs
20. And .. yes keyboard gets echoed
back.
OK now I need a little help.
Does anybody know of a terminal
emulation program that will simulate the reader on an
ASR33?
I know about? RIM and BIN loaders
but how and what to feed them I have long forgotten
My PDP-8 course completion certificate
is dated November 1975.
Rod Smallwood
Sent from Mail for Windows 10
7 Dec
7 Dec
8:43 a.m.
What I do for loading paper tape into my PDP8E via the ASR33 is.
1. key in the RIM loader from the front panel
2. Run the RIM to load the a copy of BIN from the ASR33 paper tape
3. Once the BIN is in core, you can load any other file or program from the
ASR 33 Paper tape.
What tapes do you have?
Mike Zahorik
(414) 254-6768
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Brian L.
Stuart via cctalk
Sent: Friday, December 07, 2018 10:05 AM
To: General Discussion: On-Topic and Off-Topic Posts; Rod G8DGR
Subject: Re: PDP-8/e
Several years ago when I restored my 8/M, I whipped up
a quick and dirty program that uses TCL/Tk to make a
little graphical interface for selecting, reading, and punching
paper tape images. When running, it looks something
like this:
https://www.cs.drexel.edu/~bls96/museum/asrscreen.jpg
You need the P9P (Plan9 from user space) libraries installed
to build it, but I could whip up a binary for you if you'd like
to try it out. I typically run it in a shell script that looks like:
#!/bin/sh
xterm -vb -sb -geom +180+10 -fg '#D0D0FF' -bg black -e asr33 $*
BLS
--------------------------------------------
On Fri, 12/7/18, Rod G8DGR via cctalk <cctalk at classiccmp.org> wrote:
Subject: PDP-8/e
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Date: Friday, December 7, 2018, 4:59 AM
Hi All
? Seasons Greetings..
My PDP-8/e was long due for a major
overhaul.
1. So everything out
2. Big Hoover job on the Omnibus
3. Bring up on Variac ? No smoke
4. Check? PSU volts. ? All OK
5. Power off
6. Install minimal System ? Front
Panel, Three CPU cards, RFI shield,? 4k Core and Bus
term.
7. Yup all looks in right order
8. Power on
9. Toggle in standard AC count up
program
10. Clear + Cont
11. And they are racing at
Rockingham!!
12. Yup counts up just like it should.
13. Let it run for a while.
14. All stop.
15. PSU off
16. Inset Async Card (Its 110 baud
only)
17. Fire up VT100. Beep - yup its
alive.
18. Toggle in keyboard echo test.
19. Clear + Cont ? Program runs
20. And .. yes keyboard gets echoed
back.
OK now I need a little help.
Does anybody know of a terminal
emulation program that will simulate the reader on an
ASR33?
I know about? RIM and BIN loaders
but how and what to feed them I have long forgotten
My PDP-8 course completion certificate
is dated November 1975.
Rod Smallwood
Sent from Mail for Windows 10
8:44 a.m.
What I do for loading paper tape into my PDP8E via the ASR33 is.
1. key in the RIM loader from the front panel 2. Run the RIM to load the a
copy of BIN from the ASR33 paper tape 3. Once the BIN is in core, you can
load any other file or program from the ASR 33 Paper tape.
What tapes do you have?
Mike Zahorik
(414) 254-6768
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Brian L.
Stuart via cctalk
Sent: Friday, December 07, 2018 10:05 AM
To: General Discussion: On-Topic and Off-Topic Posts; Rod G8DGR
Subject: Re: PDP-8/e
Several years ago when I restored my 8/M, I whipped up
a quick and dirty program that uses TCL/Tk to make a
little graphical interface for selecting, reading, and punching
paper tape images. When running, it looks something
like this:
https://www.cs.drexel.edu/~bls96/museum/asrscreen.jpg
You need the P9P (Plan9 from user space) libraries installed
to build it, but I could whip up a binary for you if you'd like
to try it out. I typically run it in a shell script that looks like:
#!/bin/sh
xterm -vb -sb -geom +180+10 -fg '#D0D0FF' -bg black -e asr33 $*
BLS
--------------------------------------------
On Fri, 12/7/18, Rod G8DGR via cctalk <cctalk at classiccmp.org> wrote:
Subject: PDP-8/e
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Date: Friday, December 7, 2018, 4:59 AM
Hi All
? Seasons Greetings..
My PDP-8/e was long due for a major
overhaul.
1. So everything out
2. Big Hoover job on the Omnibus
3. Bring up on Variac ? No smoke
4. Check? PSU volts. ? All OK
5. Power off
6. Install minimal System ? Front
Panel, Three CPU cards, RFI shield,? 4k Core and Bus
term.
7. Yup all looks in right order
8. Power on
9. Toggle in standard AC count up
program
10. Clear + Cont
11. And they are racing at
Rockingham!!
12. Yup counts up just like it should.
13. Let it run for a while.
14. All stop.
15. PSU off
16. Inset Async Card (Its 110 baud
only)
17. Fire up VT100. Beep - yup its
alive.
18. Toggle in keyboard echo test.
19. Clear + Cont ? Program runs
20. And .. yes keyboard gets echoed
back.
OK now I need a little help.
Does anybody know of a terminal
emulation program that will simulate the reader on an
ASR33?
I know about? RIM and BIN loaders
but how and what to feed them I have long forgotten
My PDP-8 course completion certificate
is dated November 1975.
Rod Smallwood
Sent from Mail for Windows 10
2207
days inactive
2207
days old
2 comments
2 participants
participants (2)
-
blstuart＠bellsouth.net -
m.zahorik＠sbcglobal.net