19 Aug
2003
19 Aug
'03
8:37 a.m.
Ok, I think I've finally figured out how to correctly migrate the lists and
archives from the old machine to the new machine. Yuck! There will be some
downtime. Not sure how long though. Might be two hours or so :\ Now the big
problem is just finding the time to do it. My guess is the list will move
quickly... the archives may take a bit of time, mainly because I want to go
through and clean out some particular posts, and to integrate a few bits of
the list that were missing.
By the way... upon 2nd glance, sendmail wasn't really configured optimally on
the machine. I will rectify that when I reload it all.
Jay
19 Aug
19 Aug
6:47 p.m.
New subject: CP/NET
Hello everybody.
I am trying to obtain one copy of CP/NET or MPM/NET. In .dsk format
suitable to be used with SIMH simulators. I am trying to run a copy
available
in www.cpm.z80.de and even another (that is finally the same)
in www.retroarchive.org with bad luck. Both are incomplete until I can
understand. In fact, I can't locate two binaries, MAIL.COM and
SERVER.RSP
In the good side, I could generate the NETWRKIF.RSP file using the
indications
in the CP/NET manual.
This manual tells that I need this three files to integrate them inside the
MP/M
nucleus with GENSYS.
Of course, this is only a first step. If all goes well we couldn't have yet
one CP/NET
working environment. Here is where I'm lost. What kind of "network" devices
used CP/NET ? In the manual comes one example to customize one SNIOS.RSP
in the cliente to use one Serial Port, but I assume the existence of others.
I think it would be great to allow the simulation of one MP/M-CP/NET-CP/M
network with a couple (or more) of SIMH AltairZ80's running at same time.
Cheers
Sergio
6:48 p.m.
thanks for all your work on this Jay!
Thanks Ed Sharpe archivist for SMECC
Please check our web site at
http://www.smecc.org
to see other engineering fields, communications and computation stuff we
buy, and by all means when in Arizona drop in and see us.
address:
coury house / smecc
5802 w palmaire ave
glendale az 85301
----- Original Message -----
From: "Jay West" <jwest(a)classiccmp.org>
To: <cctech(a)classiccmp.org>
Sent: Tuesday, August 19, 2003 1:26 PM
Subject: list upgrades
Ok, I think I've finally figured out how to
correctly migrate the lists
and
archives from the old machine to the new machine.
Yuck! There will be some
downtime. Not sure how long though. Might be two hours or so :\ Now the
big
problem is just finding the time to do it. My guess is
the list will move
quickly... the archives may take a bit of time, mainly because I want to
go
through and clean out some particular posts, and to
integrate a few bits
of
the list that were missing.
By the way... upon 2nd glance, sendmail wasn't really configured optimally
on
the machine. I will rectify that when I reload it
all.
Jay
7796
days inactive
7797
days old
2 comments
3 participants
participants (3)
-
esharpe＠uswest.net -
jwest＠classiccmp.org -
spedraja＠ono.com