--- Allison J Parent <allisonp(a)world.std.com> wrote: Early versions have their (well documented) problems. Commodode elected to use the WD33C93 with the autobooting SCSI cards - A2091 and up including the A500 slap-on A590 (either SCSI _or_ XT-IDE drives would work on it owing to Commodore's custom controller chip between the Amiga and the 33C93) and on the motherboard of the Amiga 3000. The wisdom in the Amiga arena is that even though C= shipped rev 02 and rev 04 chips, you need the last version ever produced (rev 08?) to take advantage of proper disconnect/reconnect operations and to have a full 7-device chain. The older chips work OK if you have one or two disk devices, but have problems with four or five disks, a CD-ROM and a tape drive. There is example code for the WD33C93, not for CP/M, but for (Net|Free)BSD on the Amiga. Also, if anyone is looking for a few rev 02 chips, I have a tube of them that I'm keeping as Amiga spares. I could let a couple go, depending on how much over shipping I'm offered. -ethan ===== Infinet has been sold. The domain is going away in February. Please send all replies to erd(a)iname.com __________________________________________________ Do You Yahoo!? Thousands of Stores. Millions of Products. All in one place. Yahoo! Shopping: http://shopping.yahoo.com