4 Jul
2014
4 Jul
'14
6:07 a.m.
i have here a VAXstation 4000/60 with a VT100 Terminal attatched the
serial console.
In >>> console mode are some commands not availible and i can not figure
out why.
I want top set kbd to 1 . >>>set kbd answer is ?23 ILL CMD. Also by
typing set kbd 1.
The test / util commands do not work also...
I tried to set a password. Type set pse 1. Login. But there is even the
same isue.
Any Ideas what is happen?
Make sure the VT100 is set to 9600 baud, no parity.
I tried with my VAX 4000/100A (KA52-A) and I get similar errors if I connect
to it using a terminal emulator set to odd parity.
Regards,
Peter Coghlan.
5 Jul
5 Jul
12:34 a.m.
Thanks for your answer.
That was Not the problem. I tried minicom with differential settings.
I figured out the problem with test /util command. The problem with the SHOW KBD still
exists.
Am 04.07.2014 um 15:07 schrieb Peter Coghlan <cctech at beyondthepale.ie>:
i have here a VAXstation 4000/60 with a VT100 Terminal attatched the
serial console.
In >>> console mode are some commands not availible and i can not figure
out why.
I want top set kbd to 1 . >>>set kbd answer is ?23 ILL CMD. Also by
typing set kbd 1.
The test / util commands do not work also...
I tried to set a password. Type set pse 1. Login. But there is even the
same isue.
Any Ideas what is happen?
Make sure the VT100 is set to 9600 baud, no parity.
I tried with my VAX 4000/100A (KA52-A) and I get similar errors if I connect
to it using a terminal emulator set to odd parity.
Regards,
Peter Coghlan.
3599
days inactive
3600
days old
1 comments
2 participants
participants (2)
-
cctech＠beyondthepale.ie -
marco＠familie-rauhut.eu