11 Mar
2021
11 Mar
'21
7:48 a.m.
Richardson, TX I assume.
At 09:42 AM 3/11/2021, John, W9DDD wrote:
I have a Xerox 820 (rev 2 -II?) that will go to
it's happy hunting grounds soon unless there is interest.
Pictures if interested, part it out if it gets to that point.
(On topic to the extent it makes room for more Teletype equipment.)
--
John, W9DDD
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
11 Mar
11 Mar
7:59 a.m.
I am interested if this is not already spoken for.
--tnx
--tom
On 3/11/21 9:48 AM, John Foust via cctalk wrote:
Richardson, TX I assume.
At 09:42 AM 3/11/2021, John, W9DDD wrote:
I have a Xerox 820 (rev 2 -II?) that will go to
it's happy hunting grounds soon unless there is interest.
Pictures if interested, part it out if it gets to that point.
(On topic to the extent it makes room for more Teletype equipment.)
--
John, W9DDD
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
11:58 a.m.
On 3/11/21 10:59 AM, Tom Uban via cctalk wrote:
I am interested if this is not already spoken for.
--tnx
--tom
On 3/11/21 9:48 AM, John Foust via cctalk wrote:
> Richardson, TX I assume.
>
> At 09:42 AM 3/11/2021, John, W9DDD wrote:
>> I have a Xerox 820 (rev 2 -II?) that will go to it's happy hunting grounds
soon unless there is interest.
>>
>> Pictures if interested, part it out if it gets to that point.
>>
>> (On topic to the extent it makes room for more Teletype equipment.)
>>
>> --
>> John, W9DDD
in a box around here somewhere I have a still unassembled Xerox 820
motherboard. Never found anyone even remotely interested.
bill
12:06 p.m.
On 3/11/21 1:58 PM, Bill Gunshannon via cctalk wrote:
On 3/11/21 10:59 AM, Tom Uban via cctalk wrote:
Is that a Xerox 820 or a "Ferguson Big Board". They are both the same
schematically. I previously
had the former and still have the latter, though mine is assembled.
--tom
I am interested if this is not already spoken
for.
--tnx
--tom
On 3/11/21 9:48 AM, John Foust via cctalk wrote:
> Richardson, TX I assume.
>
> At 09:42 AM 3/11/2021, John, W9DDD wrote:
>> I have a Xerox 820 (rev 2 -II?) that will go to it's happy hunting grounds
soon unless there is
>> interest.
>>
>> Pictures if interested, part it out if it gets to that point.
>>
>> (On topic to the extent it makes room for more Teletype equipment.)
>>
>> --?
>> John, W9DDD
in a box around here somewhere I have a still unassembled Xerox 820 motherboard.? Never
found
anyone even remotely interested.
bill
3:17 p.m.
On 3/11/21 3:06 PM, Tom Uban wrote:
On 3/11/21 1:58 PM, Bill Gunshannon via cctalk wrote:
Don't know what a Big Board is. This is one of the boards hams were
using to build W0RLI BBSes. My packet interestes went in a different
direction so I never got around to building it.
bill
On 3/11/21 10:59 AM, Tom Uban via cctalk wrote:
Is that a Xerox 820 or a "Ferguson Big Board". They are both the same
schematically. I previously
had the former and still have the latter, though mine is assembled.
--tom
I am interested if this is not already spoken
for.
--tnx
--tom
On 3/11/21 9:48 AM, John Foust via cctalk wrote:
> Richardson, TX I assume.
>
> At 09:42 AM 3/11/2021, John, W9DDD wrote:
>> I have a Xerox 820 (rev 2 -II?) that will go to it's happy hunting grounds
soon unless there is
>> interest.
>>
>> Pictures if interested, part it out if it gets to that point.
>>
>> (On topic to the extent it makes room for more Teletype equipment.)
>>
>> --
>> John, W9DDD
in a box around here somewhere I have a still unassembled Xerox 820 motherboard.? Never
found
anyone even remotely interested.
bill
1:52 p.m.
Are you offering it up?
Steve
On 3/11/2021 11:58 AM, Bill Gunshannon via cctalk wrote:
On 3/11/21 10:59 AM, Tom Uban via cctalk wrote:
I am interested if this is not already spoken
for.
--tnx
--tom
On 3/11/21 9:48 AM, John Foust via cctalk wrote:
> Richardson, TX I assume.
>
> At 09:42 AM 3/11/2021, John, W9DDD wrote:
>> I have a Xerox 820 (rev 2 -II?) that will go to it's happy hunting
>> grounds soon unless there is interest.
>>
>> Pictures if interested, part it out if it gets to that point.
>>
>> (On topic to the extent it makes room for more Teletype equipment.)
>>
>> --
>> John, W9DDD
in a box around here somewhere I have a still unassembled Xerox 820
motherboard.? Never found anyone even remotely interested.
bill
3:19 p.m.
On 3/11/21 4:52 PM, s shumaker via cctalk wrote:
Are you offering it up?
No idea where it might be at the moment. Haven't seen it since
my last relocation in 2014.
bill
Steve
On 3/11/2021 11:58 AM, Bill Gunshannon via cctalk wrote:
On 3/11/21 10:59 AM, Tom Uban via cctalk wrote:
I am interested if this is not already spoken
for.
--tnx
--tom
On 3/11/21 9:48 AM, John Foust via cctalk wrote:
> Richardson, TX I assume.
>
> At 09:42 AM 3/11/2021, John, W9DDD wrote:
>> I have a Xerox 820 (rev 2 -II?) that will go to it's happy hunting
>> grounds soon unless there is interest.
>>
>> Pictures if interested, part it out if it gets to that point.
>>
>> (On topic to the extent it makes room for more Teletype equipment.)
>>
>> --
>> John, W9DDD
in a box around here somewhere I have a still unassembled Xerox 820
motherboard.? Never found anyone even remotely interested.
bill
3:26 p.m.
On 3/11/2021 3:19 PM, Bill Gunshannon via cctalk wrote:
On 3/11/21 4:52 PM, s shumaker via cctalk wrote:
lol?? know that feeling - figured I'd ask.
Steve
Are you offering it up?
No idea where it might be at the moment.? Haven't seen it since
my last relocation in 2014.
bill
Steve
On 3/11/2021 11:58 AM, Bill Gunshannon via cctalk wrote:
On 3/11/21 10:59 AM, Tom Uban via cctalk wrote:
I am interested if this is not already spoken
for.
--tnx
--tom
On 3/11/21 9:48 AM, John Foust via cctalk wrote:
> Richardson, TX I assume.
>
> At 09:42 AM 3/11/2021, John, W9DDD wrote:
>> I have a Xerox 820 (rev 2 -II?) that will go to it's happy
>> hunting grounds soon unless there is interest.
>>
>> Pictures if interested, part it out if it gets to that point.
>>
>> (On topic to the extent it makes room for more Teletype equipment.)
>>
>> --
>> John, W9DDD
in a box around here somewhere I have a still unassembled Xerox 820
motherboard.? Never found anyone even remotely interested.
bill
6:48 p.m.
On Mar 11, 2021, at 3:19 PM, Bill Gunshannon via cctalk <cctalk at classiccmp.org>
wrote:
No idea where it might be at the moment. Haven't seen it since
my last relocation in 2014.
bill
I think I have a ?Big Board? that?s suffered a similar fate. Though it could have
potentially ended up at Paul Allens museum. I vaguely know where is should be, and that
area is inaccessible.
Zane
8:04 a.m.
5.25 inch drive or 8 inch?
George Rachor
george at rachors.com <mailto:george at rachors.com>
On Mar 11, 2021, at 7:48 AM, John Foust via cctalk
<cctalk at classiccmp.org> wrote:
Richardson, TX I assume.
At 09:42 AM 3/11/2021, John, W9DDD wrote:
I have a Xerox 820 (rev 2 -II?) that will go to
it's happy hunting grounds soon unless there is interest.
Pictures if interested, part it out if it gets to that point.
(On topic to the extent it makes room for more Teletype equipment.)
--
John, W9DDD
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
1148
days inactive
1149
days old
9 comments
6 participants
participants (6)
-
bill.gunshannon＠hotmail.com -
george.rachor＠gmail.com -
healyzh＠avanthar.com -
jfoust＠threedee.com -
shumaker＠att.net -
tom＠figureeightbrewing.com