New subject: [N8VEM-S100:2009] Re: S-100 80286 CPU board now running at 12 MHz.

27 Oct 2013

More good news Guys.  I now have our 80286 S-100 board running at 12 MHz (no
wait states) with our 4MG Static RAM board.

I noticed that my bus controller (U68) was a 82C288.  Looking around here I
found I had an 82C288-10. When I tried that, the board came up fine at 12MHz
(no wait states).  Clearly the CMOS clock generator while rated for 10MHz,
works at a higher speed. The original 82C288 I think is for 8MHz, pushing it
to 12 was too much.  

Fortunately I already have a 12Mhz clock generator (28C284-12) on board.    

Looking here:-

http://www.cpu-world.com/CPUs/80286/MANUF-AMD.html

I see there are PLCC 16MHz AMD chips.  Does anybody know where to find these
chips and the corresponding -16 clock generator and bus controllers.

John

From: n8vem-s100 at googlegroups.com [mailto:n8vem-s100 at googlegroups.com] On
Behalf Of David Fry
Sent: Saturday, October 26, 2013 1:22 PM
To: n8vem-s100 at googlegroups.com
Cc: cctalk at classiccmp.org; Andrew Lynch; monahan at vitasoft.org
Subject: [N8VEM-S100:2006] Re: S-100 80286 CPU board write-up

Hi John

Excellent news :-)

I was kinda holding off on starting my 80286 board in case the mods/fix
ended up being extensive (I have the S-100 Ram/Rom board on order also)

Just wondering if will you be investigating why the final board will only
manage 11Mhz when the prototype manages 12Mhz ?

It's not a big issue but would be nice to get to 12Mhz if possible.

regards and thanks

David Fry

On Saturday, October 26, 2013 7:06:09 PM UTC+1, monahanz wrote:

Good news, It now looks like our new 80286 Master/Slave S100 bus CPU board
works fine with not only our 4MG Static RAM board bit also the 1M RAM/ROM
board.

The problem I outlined below was due to the fact that I had jumpers wrong on
both the CPU and ROM/RAM boards.  The 80286 works fine with both boards at
11MHz (with no wait states).  

One of the reasons for "upgrading" the ROM/RAM board was to simplify the
"rats nest" of jumpers on the earlier boards for the diverse range of RAM &
RAM chips (including flash RAM)  that board can use.  The new RAM/ROM boards
should be here soon. If you have the older board, consider switching over
(it uses all the same chips/parts) .   For new users it is a very useful
memory board. 

One remaining bug I see with the 80286 board  is that some older S100 Static
RAM boards (particularly those that use PALs, such as the Godbout 128K
static "RAM21" board or the BG Computers 256K Static RAM board), need a
patch. You need to bend out pin 2 of U56 and jumper it to pin 9 of U68 - the
bus controller.  This seems to provide the early MWRITE status signal these
boards require.  Interestingly this is also the case for our 8088 CPU board
(jumper K5,2-3),  but not the 8086 board.

I have written up a detailed account for the 80286 boards construction
here:-

http://www.s100computers.com/My%20System%20Pages/80286%20Board/80286%20CPU%2
0Board.htm

And a description of the RAM/ROM board here.

http://www.s100computers.com/My%20System%20Pages/RAM
<http://www.s100computers.com/My%20System%20Pages/RAM&ROM%20Board/RAM&PROM%2
0Board.htm> &ROM%20Board/RAM&PROM%20Board.htm

Enjoy

John

From: John Monahan [mailto:mon... at vitasoft.org <javascript:> ] 
Sent: Sunday, October 20, 2013 10:53 AM
To: 'n8vem... at googlegroups.com <javascript:> '
Cc: 'cct... at classiccmp.org <javascript:> '; Andrew Lynch
(andrew... at sbcglobal.net <javascript:> )
Subject: S-100 80286 CPU board write-up

Hi everybody. I have just written up construction notes on this 80286 CPU
board.

Please see here:- for details:-

http://www.s100computers.com/My%20System%20Pages/80286%20Board/80286%20CPU%2
0Board.htm

Unfortunately there are some strange issues with the board running with RAM
boards other than our 4MG Static RAM board 

(described here:-)

http://www.s100computers.com/My%20System%20Pages/RAM%20Board/4MG%20RAM%20Boa
rd.htm

With that RAM board,  the 80286 is rock solid at 11MHz (no I/O or ROM wait
states required).

Please see the bottom of the page for details.

I am traveling all of next week but will explore further when I get back.

Sorry about the bad news

John

-- 
You received this message because you are subscribed to the Google Groups
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to n8vem-s100+unsubscribe at googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.