24 Mar
2003
24 Mar
'03
7:34 a.m.
I have acquired an HP-86B. Will this work with any older composite
monochrome monitor with an RCA video in jack or only the HP monitors which
seem to be hard to find?
Thank you
24 Mar
24 Mar
12:45 p.m.
I have acquired an HP-86B. Will this work with any
older composite
monochrome monitor with an RCA video in jack or only the HP monitors which
seem to be hard to find?
I have a feeling in the back of my mind that the output _is_ composite
video, but at a strange horizontal scan rate. Which means you can't use
just any monitor with it.
I have one of the real HP monitors (actually an NEC unit), and 3 HP86Bs.
Sometime I must dig them out and measure the scan rates, etc.
-tony
1:48 p.m.
I haven't tried a "standard" composite monitor I don't think it will
work. I KNOW they won't work with an Apple composite monitor. I've also tried them
with a multi-sync VGA monitor with a sync on green BNC input and that didn't work
either. There are two HP monitors that will work, the HP 82912 and 82913. The only
difference between the two is that the 82912 is smaller. It has about an 8" screen
and the 82913 has about a 13" screen.
Note that the 82912/82913 use a BNC input connector. IIRC the HP-86 uses a RCA
(phono-plug) connector. HP uses a cable that has a BNC fitting on one end and a phono plug
on the other. Some of the HP 9000 series 200 computers use the same monitors and cable.
Some of the 9000 series 300 computers use the same monitor but have BNC connnector so they
use a cable with two BNC connectors.
Joe
At 01:33 PM 3/24/03 -0500, you wrote:
I have acquired an HP-86B. Will this work with any
older composite
monochrome monitor with an RCA video in jack or only the HP monitors which
seem to be hard to find?
Thank you
2:22 p.m.
Joe Rigdon writes:
I haven't tried a "standard"
composite monitor I don't think it will
work. I KNOW they won't work with an Apple composite monitor.
I haven't tried it, but I can't imagine any good reason why it shouldn't
work.
I've also tried them with a multi-sync VGA monitor
with a sync on green
BNC input and that didn't work either.
Won't work because 99.99% of multi-sync VGA monitors have a minimum
horizontal scan rate of around 31.5 KHz, which is about twice the
standard RS-170 or NTSC horizontal rate.
There are two HP monitors
that will work, the HP 82912 and 82913.
Those both operate at standard RS-170 or NTSC rate, as do the Apple
monitors that accept composite video.
6:50 p.m.
Note that the 82912/82913 use a BNC input connector.
IIRC
the HP-86 uses a RCA (phono-plug) connector. HP uses a cable
that has a BNC fitting on one end and a phono plug on the
other. Some of the HP 9000 series 200 computers use the same
monitors and cable. Some of the 9000 series 300 computers use
the same monitor but have BNC connnector so they use a cable
with two BNC connectors.
Joe
My HP 82912A has an RCA input - maybe that has something to do with the
"A" suffix?
My 86s work with both the Apple and HP composite monitors. It's the
9920 (aka 9000/220) that uses the 30kHz horizontal sync instead of the
usual 15kHz and requires one of the special HP models, such as the HP
35731A.
-W
26 Mar
26 Mar
9:12 a.m.
New subject: Video Card for HP 9000/217 - was : HP-86B Monitor question
I will receive a HP 9000/217 within the next weeks ...
... there will be a 90204A video card included (or maybe a 98627A), but both of them
will not work with a "Standard VGA multisync monitor" ...
Is there a video card for my 9000/217, which can be used with a multisync VGA monitor ?
Thanks Bernd
Bernd Kopriva Phone: ++49-7195-179452
Weilerstr. 24 E-Mail: bernd(a)kopriva.de
D-71397 Leutenbach
Germany
My 86s work with both the Apple and HP composite
monitors. It's the
9920 (aka 9000/220) that uses the 30kHz horizontal sync instead of the
usual 15kHz and requires one of the special HP models, such as the HP
35731A.
... what card do you mean ?
7785
days inactive
7787
days old
5 comments
6 participants
participants (6)
-
ard＠p850ug1.demon.co.uk -
bernd＠kopriva.de -
eric-nospam-638＠brouhaha.com -
rhahm＠nycap.rr.com -
rigdonj＠cfl.rr.com -
wmsmith＠earthlink.net