DEC used embedded PDP-11 processors in many different
places. There's
the console for some of the VAX systems, and I've read some of the
DECsystem-10 or DECSYSTEM-20 systems used a PDP-11 as a console system.
Other uses of the PDP-11 that I know of are the HSCxx controllers and
some of the printers. Where else did the PDP-11 get embedded? I know
the HSZxx/HSDxx/HSJxx controllers used an Intel i960 processor, so
there's no PDP-11 there.
And speaking of the HSCxx controllers, are the PDP-11 controllers
customized or is there a standard QBUS or UNIBUS system in there?
--
Eric Dittman
dittman(a)dittman.net
Check out the DEC Ethusiasts Club at
http://www.dittman.net/
My last DEC Field Service experience was with HSC-50's.
They had their own bus (no name known by field service).
I thought they went from F11 CPUs to J11 CPUs in the later ones (HSC70).
I wondered if they ever used 78032 (uVaxII chips) in some of them.
Bill
--
d|i|g|i|t|a|l had it THEN. Don't you wish you could still buy it now!
bpechter@shell.monmouth.com|pechter@pechter.dyndns.org