18 Aug
1998
18 Aug
'98
9:41 a.m.
Still in need of a few microchannel (for PS/2) ethernet adapters with
the BNC 10base2 setup. Doesn't matter if they have AUI or RJ45 with it
as well, as long as it has the BNC/10base2 setup. I don't need 3270
cards so check any cards you think you have with the BNC connector to
see what they are.
Looking for donations, trades or reasonable priced cards for a parochial
school network project that's overdue. I've gotten a few good reponses
and have a couple on the way but I'm going to be about 4 or so short
yet. I've also gotten one or two ridiculously high quotes for used
cards. This is a project on a shoestring budget so no $30 or $40 cards
please.
Russ Blakeman
Harned, KY USA
20 Aug
20 Aug
2:01 a.m.
--
Jim Strickland
jim(a)calico.litterbox.com
-----------------------------------------------------------------------
Vote Meadocrat! Bill and Opus in 2000 - Who ELSE is there?
-----------------------------------------------------------------------
2:02 a.m.
We have a local equivalent of Wierd Stuff Warehouse here. Next time I'm there
I'll see if they have any MCA ethernet boards.
Still in need of a few microchannel (for PS/2) ethernet adapters with
the BNC 10base2 setup. Doesn't matter if they have AUI or RJ45 with it
as well, as long as it has the BNC/10base2 setup. I don't need 3270
cards so check any cards you think you have with the BNC connector to
see what they are.
Looking for donations, trades or reasonable priced cards for a parochial
school network project that's overdue. I've gotten a few good reponses
and have a couple on the way but I'm going to be about 4 or so short
yet. I've also gotten one or two ridiculously high quotes for used
cards. This is a project on a shoestring budget so no $30 or $40 cards
please.
Russ Blakeman
Harned, KY USA
--
Jim Strickland
jim(a)calico.litterbox.com
-----------------------------------------------------------------------
Vote Meadocrat! Bill and Opus in 2000 - Who ELSE is there?
-----------------------------------------------------------------------
7:48 a.m.
Jim wrote:
We have a local equivalent of Wierd Stuff Warehouse
here. Next time I'm there
I'll see if they have any MCA ethernet boards.
---------------------------------------------------------------
Great, very much appreciated. Now if Doug can get me info on the parallel buggers
(I've never heard of) then this whole thing will work out great. I really need the
ones with the 10base2 BNC connectors.
--------------------------------------------------------------------
Russ Blakeman
RB Custom Services / Rt. 1 Box 62E / Harned, KY USA 40144
Phone: (502) 756-1749 Data/Fax:(502) 756-6991
Email: rhblake(a)bbtel.com or rhblake(a)bigfoot.com
Website: http://members.tripod.com/~RHBLAKE/
ICQ UIN #1714857
AOL Instant Messenger "RHBLAKEMAN"
* Parts/Service/Upgrades and more for MOST Computers*
--------------------------------------------------------------------
2:07 a.m.
On Tue, 18 Aug 1998, Russ Blakeman wrote:
Still in need of a few microchannel (for PS/2)
ethernet adapters with
the BNC 10base2 setup. Doesn't matter if they have AUI or RJ45 with it
as well, as long as it has the BNC/10base2 setup. I don't need 3270
cards so check any cards you think you have with the BNC connector to
see what they are.
Have you considered using parallel-port 10base2 adapters? They seem to be
going for about $5/pop these days, and they don't care what kind of bus
you've got.
-- Doug
2:20 a.m.
New subject: name this keypad
I buy the weirdest stuff sometimes. It's a hex keypad that obviously
belongs to a single-board computer, but not for a CPU I'm familiar with.
CPU-specific labels are AC0, AC1, AC2, AC3, PC, NI, FLAG, and STK0. What
does this keypad belong to? (And does anybody need one?)
-- Doug
12:54 p.m.
New subject: name this keypad
A non-text attachment was scrubbed...
Name: not available
Type: text
Size: 434 bytes
Desc: not available
Url :
http://www.classiccmp.org/pipermail/cctalk/attachments/19980820/210a0fd4/at…
7:46 a.m.
Doug Yowza wrote:
On Tue, 18 Aug 1998, Russ Blakeman wrote:
Didn't even know they existed! I've seen AUI to 10baseT/10base2 and other
"adapters" but never seen a parallel to BNC. That would work too since the
printer(s) will go on the server and this leaves all the workstation's
parallel ports open, not to mention (as you say) I needn't worry what machine
they go on.
Any idea who might have some, especially at that price?
--------------------------------------------------------------------
Russ Blakeman
RB Custom Services / Rt. 1 Box 62E / Harned, KY USA 40144
Phone: (502) 756-1749 Data/Fax:(502) 756-6991
Email: rhblake(a)bbtel.com or rhblake(a)bigfoot.com
Website: http://members.tripod.com/~RHBLAKE/
ICQ UIN #1714857
AOL Instant Messenger "RHBLAKEMAN"
* Parts/Service/Upgrades and more for MOST Computers*
--------------------------------------------------------------------
Still in need of a few microchannel (for PS/2)
ethernet adapters with
the BNC 10base2 setup. Doesn't matter if they have AUI or RJ45 with it
as well, as long as it has the BNC/10base2 setup. I don't need 3270
cards so check any cards you think you have with the BNC connector to
see what they are.
Have you considered using parallel-port 10base2 adapters? They seem to be
going for about $5/pop these days, and they don't care what kind of bus
you've got.
9639
days inactive
9641
days old
7 comments
4 participants
participants (4)
-
ard＠p850ug1.demon.co.uk -
jim＠calico.litterbox.com -
rhblake＠bbtel.com -
yowza＠yowza.com