22 May
2002
22 May
'02
4:20 a.m.
-----Original Message-----
From: Rod Young [mailto:rodyoung@shaw.ca]
Yes, 2MB on board, but I'm looking for something
bigger than
the 4MB (it's
Me too ;)
I'm just getting the unit going, and need the BNC
terminators
to make the
You know that you can also use an AUI terminator if your 2000 has
an AUI port? I think this goes without saying... :)
ethernet happy, and also a cable ...08 to make the
9pin a
console port (as
this is a VS2000).
It's a simple straight-through serial cable with pins 8 and 9
tied together on the machine end. Nothing fancy. You can make
one up in five minutes with parts from radio shark.
Chris
Christopher Smith, Perl Developer
Amdocs - Champaign, IL
/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl
Hacker.")."\x08!\n");
'
22 May
22 May
4:51 a.m.
I actually have a DEC printer adapter (MMJ->9pin) which kind of works in the
9pin port on the VS2000 (I think) as it does display some text... but not
all from what I can tell. Appears to only report lines with "?" marks...
which are warnings and "??" marks I assume are errors. I get a ?? on the
device line "1" (ethernet) and thought I read somewhere that the thinwire
had to be terminated or forget it... and given the 9 pin adapter I have, I'm
not sure about the 8-9 pin short, so have a few things to workout I guess
before I really know what's going on....
Yes, tried hooking up the AUI port too, but the thickwire cables I have
won't fit! The gender is fine, but both the cables and the AUI port on the
VS have the locking posts. I seem to be hitting dead ends all over... but
will try to connect the thinwire to resolve the "??" reported, and also make
a proper 9pin cable, then will see where that gets me.
rod
----- Original Message -----
From: "Christopher Smith" <csmith(a)amdocs.com
To: <cctalk(a)classiccmp.org
Sent: Wednesday, May 22, 2002 10:20 AM
Subject: RE: TK50Z-GA and MicroVax 3100/90?
----------------------------------------------------------------------------
----
-----Original
Message-----
From: Rod Young [mailto:rodyoung@shaw.ca]
Yes, 2MB on board, but I'm looking for
something bigger than
the 4MB (it's
Me too ;)
I'm just getting the unit going, and need the
BNC terminators
to make the
You know that you can also use an AUI terminator if your 2000 has
an AUI port? I think this goes without saying... :)
ethernet happy, and also a cable ...08 to make
the 9pin a
console port (as
this is a VS2000).
It's a simple straight-through serial cable with pins 8 and 9
tied together on the machine end. Nothing fancy. You can make
one up in five minutes with parts from radio shark.
Chris
Christopher Smith, Perl Developer
Amdocs - Champaign, IL
/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl
Hacker.")."\x08!\n");
'
--------------------------------------------------------------------------
-----------
The information contained in this message is proprietary of Amdocs,
protected from disclosure, and may be privileged.
The information is intended to be conveyed only to the designated
recipient(s)
of the message. If the reader of this message is not
the intended
recipient,
you are hereby notified that any dissemination, use,
distribution or
copying of
this communication is strictly prohibited and may be
unlawful.
If you have received this communication in error, please notify us
immediately
> by replying to the message and deleting it from your computer.
> Thank you.
--------------------------------------------------------------------------
-----------
8298
days inactive
8298
days old
1 comments
2 participants
participants (2)
-
csmith＠amdocs.com -
rodyoung＠shaw.ca