10 Aug
2002
10 Aug
'02
8:21 a.m.
On 08/08/2002 02:56:27 PM MST Al Kossow wrote:
Does anyone have access to an Olivetti M20 and a eprom programmer?
I'd like to get copies of the Z8000 boot/io code from one.
I have put one up on
ftp://ftp.groessler.org/pub/chris/olivetti_m20/misc/bios/m20rom
It displays "Bootstrap Loader Rev. 1.0" when the machine is turned
on.
Do you have some M20 related software/information? I'm always
interested in that...
regards,
chris
13 Aug
13 Aug
2:17 a.m.
Do you have some M20 related software/information?
I've located a copy of CP/M for the Z8000, and may be getting
a set of 5" discs which would most likely be for the M20.
A scanned copy of a (poor quality) copy of the CP/M 8000
manual set is up at www.spies.com/aek/pdf/digitalResearch.
3:16 a.m.
New subject: Z8000 was Re: Olivetti M20 boot prom dump?
What is the relation between the Z8000 and M20? I have the PDS Z8000 and
a number of disks, but no manuals to speak of except the Z8000
Development Module Hardware Reference Manual (looks more like a user
manual.)
Al Kossow wrote:
Do you have some M20 related
software/information?
I've located a copy of CP/M for the Z8000, and may be getting
a set of 5" discs which would most likely be for the M20.
A scanned copy of a (poor quality) copy of the CP/M 8000
manual set is up at www.spies.com/aek/pdf/digitalResearch. 
15 Aug
15 Aug
4:35 a.m.
New subject: Atari Unix System V for the TT030's
For those who own Atari TT030 workstations, I have finally gotten a hard
disk with Atari's version of Unix System V on it running along with a
diskette with setboot.prg utility that sets the nvram in the TT030's to
recognize and boot from the Unix Hard Disk.
If anyone is interested, I can make ghost images of the 300MB SCSI hard disk
for you. One word of caution, according the Atari engineer who wrote Atari
Unix, it does not work on all TT030's. Some of the units had bugs and
issues, most came back into Atari's service center where the -33 68030's
were replaced with slower 16mhz CPU's, so while I will guarantee that the
image works, I cannot guarantee if your TT will have a problem or not. So
far I've tried it out with 3 TT's and they all work. Also Atari Unix will
recognize Riebl VME ethernet cards and set them as /dev/en0 so you can hook
the TT up to the internet directly. I personally am going to see if I can
get Apache to work on the TT as it would be great to run a website for
Atari's on an actual Atari computer.
If you want a copy, I need a 300mb SCSI HD to Ghost the image to and you pay
shipping to and from me.
Curt
8170
days inactive
8175
days old
3 comments
4 participants
participants (4)
-
aek＠spies.com -
cpg＠aladdin.de -
curt＠atarimuseum.com -
marvin＠rain.org