forwarded to the folks at Johns Hopkins with the need, thank you very much!
They designed the board so they are likely to know what the part needs to do, and you are
correct it?s for ground support, so presumably they will be able to design a replacement
if necessary. They may also have the datasheet.
I Got two other responses as well, one with a part number listing (with 52,000 parts
available, which is pretty suspicious) and one offering to design a module as you suggest,
and forwarded those as well.
Very much obliged!
210-522-6025 office 210-379-4635 cell
On Jun 5, 2018, at 8:06 PM, Eric Smith via cctalk
<cctalk at classiccmp.org> wrote:
On Tue, Jun 5, 2018 at 8:47 AM, Tapley, Mark via cctalk <
cctalk at classiccmp.org> wrote:
I have a need at work for an unusual SRAM
chip (related to the New
if you have a source or supply of these parts:
That's not a chip, it's a hybrid multi-chip module. Probably just about
unobtanium now. If a datasheet is available, it wouldn't be hard to
engineer a form/fit/function replacement, if it's for ground support and
you don't need radiation-hardened or mil-spec. If no datasheet, could
design from schematics of board it is used on. If no datasheet and no