SUPRDAVE(a)aol.com wrote:
In a message dated 98-07-29 12:49:59 EDT, you write:
<< I'm trying to setup the HPscanjet on my ps/2 and of course the startup
is complaining about the new interface. I have the refdisk for the ps/2
but not the required setup disk for the scanject interface. Any
suggestions?
Until I crack this the system will not boot with the card in place
unless, is there is a bypass procedure? >>
what you are missing is the .adf file for the option you installed. you need
to copy the .adf file to the reference disk and then run auto config. you
might want to post on comp.sys.ibm.ps2.hardware and see if anyone knows what
the filename is for the option you installed.
Peter Wendt in Germany has a Microchannel Enthusiasts Page at
http://members.aol.com/mcapage0/mcaindex.htm and has a program for free download
known as QBMCA that will look at the adapter cards and show the ID and name info
for each card. Once you know the ID number, he also has a ton of ADF's (unless
HP has a newer one on their support site). If the card comes up as, say, 5D1F
then you need to get _5D1F.ADF and rename it to @5D1F.ADF and put it either on
your reference disk or a disk by itself, then when prompted by the reference
program you give it the disk with the proper ADF and it will copy and use the
file as needed. Viola! You have a functional machine again.
--------------------------------------------------------------------
Russ Blakeman
RB Custom Services / Rt. 1 Box 62E / Harned, KY USA 40144
Phone: (502) 756-1749 Data/Fax:(502) 756-6991
Email: rhblake(a)bbtel.com or rhblake(a)bigfoot.com
Website:
http://members.tripod.com/~RHBLAKE/
ICQ UIN #1714857
AOL Instant Messenger "RHBLAKEMAN"
* Parts/Service/Upgrades and more for MOST Computers*
--------------------------------------------------------------------