I finally started digging in to find out what was wrong with a couple Soroc IQ120s. The first one was easy; just a memory chip (2102) that went bad. The second one is a bit tougher. I *think* I have the problem narrowed down to a Signetics 82S201 PLA, and therein lies the problem. Is there a replacement chip available, and is the coding of the chip available? If the coding is not availble, can I just go through a counter on the input and record the output states to come up with the chip programming? Needless to say, I am not real familiar with these devices :). There are two of these devices in parallel, and when I pull out the supected bad one (one makes no difference, pulling the other one starts the screen display again), the screen starts to work again. My suspicion is that the two are in parallel to increase the drive to the other chips. There are probably more problems since I don't hear the beep when the unit is turned on. The keyboard unit has already been checked out on the working Soroc. Any thoughts or comments?