16 Dec
2001
16 Dec
'01
12:12 p.m.
From: Richard Erlacher <edick(a)idcomm.com>
A PC floppy cable certainly wouldn't work with the
Little Boards I have,
since
they use the standard floppy disk cable, which has no
twists or cuts.
Take a "modern" PC dual-fdd cable and cut off the end which has the twist
in it.
Glen
0/0
16 Dec
16 Dec
12:34 p.m.
On Sun, 16 Dec 2001, Glen Goodwin wrote:
Actually, you would need a PC/XT cable that has only card edge
connectors to work with the Ampro LittleBoard. (Despite my earlier
erroneous statement!)
- don
From: Richard
Erlacher <edick(a)idcomm.com>
A PC floppy cable certainly wouldn't work
with the Little Boards I have,
since
they use the standard floppy disk cable, which
has no twists or cuts.
Take a "modern" PC dual-fdd cable and cut off the end which has the twist
in it. Glen
0/0
4:45 p.m.
That's what Allison suggested. It might be a mite short, though.
Dick
----- Original Message -----
From: "Glen Goodwin" <acme_ent(a)bellsouth.net>
To: <classiccmp(a)classiccmp.org>
Sent: Sunday, December 16, 2001 4:12 PM
Subject: Re: Ampro Little Board questions...
From: Richard
Erlacher <edick(a)idcomm.com>
A PC floppy cable certainly wouldn't work
with the Little Boards I have,
since
they use the standard floppy disk cable, which
has no twists or cuts.
Take a "modern" PC dual-fdd cable and cut off the end which has the twist
in it.
Glen
0/0
8327
days inactive
8327
days old
2 comments
3 participants
participants (3)
-
acme_ent＠bellsouth.net -
donm＠cts.com -
edick＠idcomm.com