Post-move diary - test-drb@ccmp.vtda.org

30 Mar 1999

...
 IIRC in an 11/34, the power connectors are at the A-end
of the backplane. 
Come to think of it, I think you're right... confirmed by the fact
that the grant cards go in the D slot, which is the fourth from the
back of the chassis...

...
 It wouldn't be hard to make up the harness. It does
have 2 connectors on 
the PSU end (15 way for power and 6 way for LTC/ACLO/DCLO). The VT11 does 
use LTC IIRC to sync the display to the mains and reduce flicker. 
I guess I could make a harness if I can't find the one which already
has one... I'd like to have the printset so I can make the cable lengths
correct, and so I have the part numbers for the connectors...

					Megan Gentry
					Former RT-11 Developer

+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL   | Internet (work): gentry!zk3.dec.com |
| Unix Support Engineering Group |          (home):  mbg!world.std.com |
| Compaq Computer Corporation    | addresses need '@' in place of '!'  |
| 110 Spitbrook Rd. ZK03-2/T43   | URL:     http://world.std.com/~mbg/ | 
| Nashua, NH 03062               | "pdp-11 programmer - some assembler |
| (603) 884 1055                 |  required." - mbg                   |
+--------------------------------+-------------------------------------+