At 04:23 PM 6/3/2007, Rod Smallwood wrote: I'm not sure why I'm responding to this troll, but I can't resist. The server must be running a MOP listener. That's the protocol that the client uses when you boot the ethernet device. MOP is a DECnet protocol. For many versions of VMS, the way you get a MOP listener is to install DECnet. For VMS 7.0 and later, there's a separate MOP listener that provides just that part of DECnet. Crap. You MUST have a network to run a Local Area VAXcluster. You know, a *Local Area Network*? LAVC booting uses DECnet to boot. You can't make any of this work without a LAN, without DECnet. I suppose you'll keep flailing around hoping that something will work, blaming others for your mistakes. Enjoy yourself. Huh? Nope, if you followed the very detailed directions you've been given, you could diskless boot the server. You could then try to get a disk set up and booted. Not a red herring at all. LANCP is not an "old diagnostic tool" it's actually fairly recent. Using CLUSTER_CONFIG as you're supposed to will use it to set up the client download. Did you try that? Probably not. -Rick