Hey everyone, thanks for always serving as a great sounding board and source of advice! I have an issue with a PDP8E which has an issue with the power supply.? The -15V, 15V, and 5V are good, and my Bus Loads board is good, but for some reason the power supply is bringing down the 3.75V signal from the bus loads to 0V (this is the DC VOLTS OK grey wire from the power supply). I'm having troubles finding the schematics of the PDP8e power supply, also any suggestions on what could be pulling the 3.75V to 0V (tested multiple Omnibus backplanes, and bus load boards, so I'm fairly certain it's the PSU). All help is MUCH appreciated, thanks!