4 Dec
2001
4 Dec
'01
9:53 a.m.
Does anyone have a Wyse 60 they want to part with on the cheap? (working
only please... I have a dead one thanks)
I tried buying one on ebay a few times, and each time, either they were
in horrible condition, or went above my price threshold, or I got
"ebayed" at the last second by someone outbidding me.
I would prefer one in the NJ area that I can drive and pick up as cost is
my #1 issue, but if total cost (buy + shipping) isn't too bad, I will
accept shipped ones.
I might have stuff to trade, but most everything I have that is available
to be parted with is PC related, which A: isn't as popular here, and B:
isn't as hard to get as other systems. I do have a C64 or two (don't know
functional condition), maybe some other stuff (like these Zebra 2500
manuals I keep tripping on) If you have something in mind, let me know, I
will see if I have it.
Thanks
-chris
<http://www.mythtech.net>
7 Dec
7 Dec
6:24 p.m.
New subject: FS: Only ATR8500 in existence
To the best of my knowlege, this is the only SWP ATR8500 in existence.
It's serial number is "005". It was a prototype sent to B&C way back
when. It includes the original manuals, boot disks, schematics etc. It
is an Atari peripheral (disk interface, printerface, serialface) and a
CP/M computer with 64kb onboard. It is a board (no case) about the same
dimensions as the controller board on a Seagate St506 but with different
mounting holes.
Basicly this is an ATR8000 with a hardware uart, a dma jack and a much
smaller footprint. Power requirements can be met with a standard XT/AT
supply (re-order pins to match jack).
It does not require an Atari to use as it will interface with a standard
dumb terminal.
Any offers?
Regards,
Jeff
--
-----------------------------------------------------------
Jeffrey S. Worley
Asheville, NC USA
828-6984887
UberTechnoid(a)Home.com
-----------------------------------------------------------
8 Dec
8 Dec
4 p.m.
New subject: FS: Only ATR8500 in existence
UberTechnoid(a)home.com wrote:
To the best of my knowlege, this is the only SWP ATR8500 in existence.
It's serial number is "005". It was a prototype sent to B&C way back
when. It includes the original manuals, boot disks, schematics etc. It
is an Atari peripheral (disk interface, printerface, serialface) and a
CP/M computer with 64kb onboard. It is a board (no case) about the same
dimensions as the controller board on a Seagate St506 but with different
mounting holes.
Basicly this is an ATR8000 with a hardware uart, a dma jack and a much
smaller footprint. Power requirements can be met with a standard XT/AT
supply (re-order pins to match jack).
It does not require an Atari to use as it will interface with a standard
dumb terminal.
Any offers?
Please don't get insulted as all I can offer is $100 + shipping. If no
one offers please consider it. And Yes I thik it's worth more but I'm
on a tighter budget lately. I have an ATR-8000 and I think it's great.
--
Linux Home Automation Neil Cherry ncherry(a)home.net
http://members.home.net/ncherry (Text only)
http://linuxha.sourceforge.net/ (SourceForge)
http://hcs.sourceforge.net/ (HCS II)
8336
days inactive
8340
days old
2 comments
3 participants
participants (3)
-
mythtech＠Mac.com -
ncherry＠home.com -
UberTechnoid＠home.com