23 Mar
2002
23 Mar
'02
8:30 a.m.
I'm hoping to come up with an alternative to this,
naturally, but I have to
start somewhere, and that will require a line-by-line assembler, so one can
use the mnemonics instead of having to learn the HEX codes for each
instruction.
Hopefully there's one already been done out there somewhere ...
Brain rot kept me from remembering how I handled this... I
didn't... well, I have a hardware debugger called DryIce-51
or something like that. You pull your 8051, plug this in,
it has its own 8051, and IIRC it has an assembler built-in.
Handy for debugging interrupt routines, althought it's not
a true ICE, so you can't trace through machine states.
Then again, more brain rot... I had *some* kind of monitor,
because for the DS5000, I found it handier to use it than
to pull the chip and stick in the DryIce.
Found the SIMTEL 8051 stuff, at least what I downloaded.
Wasn't much. But I have a WIC-80 tape labeled to indicate
some more 8051 stuff is on it. The 486 with the Jumbo-250
seems to be dying...
-dq
23 Mar
23 Mar
12:38 p.m.
I gave my '250 away about a decade ago. The tapes tended to die much sooner
than this.
Dick
----- Original Message -----
From: "Douglas Quebbeman" <dhquebbeman(a)theestopinalgroup.com>
To: <classiccmp(a)classiccmp.org>
Sent: Saturday, March 23, 2002 12:30 PM
Subject: RE: SIMTEL (was Re: Source code for 805x line-by-line assembler?)
> I'm hoping to come up with an alternative to
this, naturally, but I have
to
> start somewhere, and that will require a
line-by-line assembler, so one
can
use the
mnemonics instead of having to learn the HEX codes for each
instruction.
Hopefully there's one already been done out there somewhere ...
Brain rot kept me from remembering how I handled this... I
didn't... well, I have a hardware debugger called DryIce-51
or something like that. You pull your 8051, plug this in,
it has its own 8051, and IIRC it has an assembler built-in.
Handy for debugging interrupt routines, althought it's not
a true ICE, so you can't trace through machine states.
Then again, more brain rot... I had *some* kind of monitor,
because for the DS5000, I found it handier to use it than
to pull the chip and stick in the DryIce.
Found the SIMTEL 8051 stuff, at least what I downloaded.
Wasn't much. But I have a WIC-80 tape labeled to indicate
some more 8051 stuff is on it. The 486 with the Jumbo-250
seems to be dying...
-dq
8158
days inactive
8158
days old
1 comments
2 participants
participants (2)
-
dhquebbeman＠theestopinalgroup.com -
edick＠idcomm.com