Yeah, I should have said DIP pkg as well, for ease of programming. I've used lots of flash devices (w/ DIP pkg) that are pinout compatible and 3.3v supply, but all are x8. I'm looking for x16 so I can get a 32-bit project down to two sockets. (If this was for something in circuit programmable, I'd be fine with some high density tsop thing, but I don't have that nicety.) -R On Oct 6, 2012, at 8:26 PM, Guy Sotomayor <ggs at shiresoft.com> wrote:

Hi Jay, Sorry about not getting back, Your message was lost in the noise. The current bidder on the elevator card is Clem Maloney in Vic Aus. I think he's worried about not being able to find any software or drivers. I haven't been able to locate anything here, or on the net. The 020 board was purchased by a list member a month ago, He was going to play with it. I have not heard back on his success. Do you have a DN 3XXX? Interesting. I started my career at a company that was in direct competition with Apollo/Mentor, That being Metheus in the CAD / CAE workstation arena. Jim. -----Original Message----- From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org]On Behalf Of Jay Jaeger Sent: Wednesday, November 14, 2012 2:37 PM To: General Discussion: On-Topic and Off-Topic Posts Subject: Re: Unusual PC hardware and EPROMS for sale I have some interest in the PC Elevator card, and may have some Apollo software for it lying around on floppy disk, and might also have a manual. (When I worked at Wisconsin DOT we had some of these in DN3000 and DN3500 machines). On 10/5/2012 6:15 PM, jim davis wrote: