Looking for a matched stepping pair of P133s to rebuild an old project machine I never finished. I'll also need to find a couple of passive heatsinks and retaining clips for socket 5/7 as well. The heatsink and single cpu currently in it appear to be epoxy bonded. The system itself is a Dell PowerEdge SP5100-2 that currently has a single P100 cpu. It's an unusual server in the way it's constructed that has tons of EISA slots and uses a backplane type layout. I rescued it about 4-5 years ago from the scrapper and it came with a 4 EISA dual channel SCSI cards in it. I don't really have anything to budget for this thing (which is why it's been sitting under the desk unfinished for 4-5 years) but I'll gladly cover the postage or trade a MMJ adapter or cable if someone has some extra stuff laying around that I'm looking for. (Mylex/BusLogic/Bustek SCSI cards or programming docs would also be extremely helpful.) The system uses a 430NX chipset which will support up to a P133 and 512MB of FPM memory (if memory serves). I'll eventually be looking for a set of 8ea 64MB 60ns 72 pin FPM Parity SIMMs (with tin plated contacts, not gold) for it as well. I've got some EISA OSS drivers I'd like to test/debug so it's about time to finally get the silly thing going. It's currently missing all 4 of the 3.5" hard drive mounting sleds/trays and I don't have any of the special rails to mount a cdrom drive or anything in the 3 empty 5.25" bays so if anyone might have a lead on these parts or even just know the part numbers for these things it would be most helpful. Failing that, I guess there's always lucite and velcro :) [I just realized I last looked into doing something with this system in 2004: http://www.classiccmp.org/pipermail/cctalk/2004-June/043856.html It's definitely time to get it going...] -Toth