--- Gareth Knight <garethknight(a)contactbox.co.uk> wrote: It tends to be a loose Agnes chip. In the A500, C= later shipped a metal clip to attempt to hold it together in shipping. While the machine is open, check the integrity of the Agnus socket (the big square one in the middle of the board). If a previous owner tried to remove the Fat Agnes without a PLCC extractor, it's possible that they goobered up the socket. Mostly, as long as there isn't a vertical crack from the top of a corner down towards the PCB, you are probably OK for this problem. If no crack, press on the Fat Agnes to re-seat it. It might click as it seats. -ethan === Infinet has been sold. The domain is going away. Please send all replies to erd(a)iname.com __________________________________________________ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com