18 Jun
2005
18 Jun
'05
5:10 p.m.
Subject: Re: PDP11/23+ goes on
From: aek at bitsavers.org (Al Kossow)
Date: Sat, 18 Jun 2005 13:30:01 -0700 (PDT)
To: classiccmp at classiccmp.org
Trust me it's faster! I've run both. The software needs to run
at 19.2k or faster to be realistic.
Allison
What is the "modern way" to get
software into the PDP11?
I use a ZIP drive and a Qbus MSCP disc controller.
A software-only solution (though much slower) is to use the
TU58 simulation software that is around 
18 Jun
18 Jun
5:24 p.m.
>I use a ZIP drive and a Qbus MSCP disc controller.
Sounds interesting. But where to get that MSCP controller??
>A software-only solution (though much slower) is to
use the
>TU58 simulation software that is around
... But with it I would be able to boot my machine. At the moment I have
NOTHING to boot up my system, copy disks, transfer data from pc etc...
But I have a lot (perhaps more than 100) of these 8" disks.
Can I boot RT11 or RSX11 from floppy???
Regards,
Philipp :-)
19 Jun
19 Jun
1:34 p.m.
On Sat, 18 Jun 2005, Allison wrote:
And another tip when using the TU58 simulator is to NOT run it under
Windows 9x, which handles DOS serial port access VERY POORLY. Run it in
pure DOS. Better yet, run the Linux version.
Here's a jumping off point to the TU58 simulator:
http://www.fpns.net/willy/pdp11/tu58-emu.htm
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
[ Old computing resources for business || Buy/Sell/Trade Vintage Computers ]
[ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]
Subject: Re: PDP11/23+ goes on
From: aek at bitsavers.org (Al Kossow)
Date: Sat, 18 Jun 2005 13:30:01 -0700 (PDT)
To: classiccmp at classiccmp.org
Trust me it's faster! I've run both. The software needs to run
at 19.2k or faster to be realistic. What is the "modern way" to get
software into the PDP11?
I use a ZIP drive and a Qbus MSCP disc controller.
A software-only solution (though much slower) is to use the
TU58 simulation software that is around 
5:03 p.m.
Vintage Computer Festival wrote:
And another tip when using the TU58 simulator is to
NOT run it under
Windows 9x, which handles DOS serial port access VERY POORLY. Run it in
pure DOS. Better yet, run the Linux version.
Here's a jumping off point to the TU58 simulator:
http://www.fpns.net/willy/pdp11/tu58-emu.htm
Sellam, which of the Linux emulators are you using, and with what
Linux kernel version?
Doc
20 Jun
20 Jun
4:19 p.m.
On Sun, 19 Jun 2005, Doc Shipley wrote:
Vintage Computer Festival wrote:
Sorry, I'm a hypocrite. I use the DOS version for now until I finally get
the time to get my Linux conversion box up and running.
But I imagine the Linux version will work on any standard Linux install
with properly configured serial ports.
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
[ Old computing resources for business || Buy/Sell/Trade Vintage Computers ]
[ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]
And another tip when using the TU58 simulator is
to NOT run it under
Windows 9x, which handles DOS serial port access VERY POORLY. Run it in
pure DOS. Better yet, run the Linux version.
Here's a jumping off point to the TU58 simulator:
http://www.fpns.net/willy/pdp11/tu58-emu.htm
Sellam, which of the Linux emulators are you using, and with what
Linux kernel version?
7007
days inactive
7009
days old
4 comments
4 participants
participants (4)
-
ajp166＠bellatlantic.net -
doc＠mdrconsult.com -
hachti＠hachti.de -
vcf＠siconic.com