From: Camiel Vanderhoeven <iamcamiel at gmail.com> Date: Sun, 29 Jul 2012 17:25:15 +0200 Subject: Re: H7202KA power supply Replacing the output caps on the 7213 power supply fixed the VBB output. However, the + and - 15 V outputs are now completely dead. I'm fairly certain those voltages were ok when I started. These are from the 7211 module. Not having any schematics, I traced a few wires. Looks like there's circa +160V and -160V and +14V and -14V coming from the main regulator (H7200). The 7211, like the 7213, uses a 3527A, which is driven by a 32.5 KHz clock signal from the main regulator. No picofuses anywhere as far as I can tell. Camiel.