13 Feb
2003
13 Feb
'03
10:38 p.m.
Local scrapper/reseller ahd a Cubix 1010 "fault tolerant' computer system,
it is 2 chassis each with 6 P-200 or 233 boards in them....
15 Feb
15 Feb
12:02 p.m.
Perfect for a cluster! Bus built-in!
fred
-----Original Message-----
From: cctalk-admin(a)classiccmp.org [mailto:cctalk-admin@classiccmp.org]
On Behalf Of Geoff Reed
Sent: Friday, 14 February, 2003 04.38
To: cctech(a)classiccmp.org
Subject: Probably doesn';t fall under the 20 year rule... Cubix 1010
Local scrapper/reseller ahd a Cubix 1010 "fault tolerant' computer
system,
it is 2 chassis each with 6 P-200 or 233 boards in them....
2:09 p.m.
----- Original Message -----
From: "Fred deBros" <fdebros(a)verizon.net>
To: <cctalk(a)classiccmp.org>
Sent: Friday, February 14, 2003 9:47 AM
Subject: RE: Probably doesn';t fall under the 20 year rule... Cubix 1010
Perfect for a cluster! Bus built-in!
Errr... Not really. The Cubix machines I looked at are basically 16-slot
(IIRC) passive-backplane, with the ability to divide the backplane into as
many as eight seperate segments with one slot used for the SBC and one
additional card, or any other way that adds up to 16 slots. But, the SBCs
have ethernet built-in, a small switch would drop down in back of the units
inside the 1010 and nobody'd be the wiser...
I saw someone selling several *rack-fulls* of Cubix machines as one lot
several years ago on epay, the guy wanted to experimant with clusters but
never found a Round Tuit and decided to move on. I think they're awfully
kewl, even the older '486 based machines, but I've got enough projects that
I don't need a cross-country trek to get another'n.
fred
Bob
2:23 p.m.
New subject: Looking for 29F256 or 29F512 DIP parts
I'm on a hunt to find some 29F256 or 29F512 DIP FLASH parts. Anyone have 5
or 6 pieces they want to sell/trade/give?
--John
7908
days inactive
7910
days old
4 comments
5 participants
participants (5)
-
bshannon＠tiac.net -
fdebros＠verizon.net -
geoffr＠zipcon.net -
jcwren＠jcwren.com -
rschaefe＠gcfn.org