6 Dec
2021
6 Dec
'21
11:02 a.m.
Power Supplies, due to their Weight, are placed at the bottom of Racks (prevent tip overs
/ weight distribution).
https://avitech.com.au/?page_id=366
The PDP-11/70 Maintenance and Installation Manual (EK-11070-MM-002) explains that the
basic PDP-11/70 system components are located in a double cabinet as shown in Figure 1-1
of that manual.
https://i0.wp.com/avitech.com.au/wp-content/uploads/2016/05/major-assemblie…
greg
Date: Sat, 4 Dec 2021 19:28:01 -0800
From: Marc Howard <cramcram at gmail.com>
To: "General Discussion: On-Topic Posts Only" <cctech at classiccmp.org>
Subject: Need picture of power supply mounted in 11/40 cabinet
7 Dec
7 Dec
2:16 p.m.
I have seen both upper and lower...if you fish through you can find what
you need here:
https://www.vintagecomputer.net/digital/PDP11-40/
https://www.vintagecomputer.net/digital/PDP11-40_full-height/
https://www.vintagecomputer.net/digital/PDP11-40_industrial11/
Bill
On Mon, Dec 6, 2021 at 2:03 PM Gregory Beat via cctech <
cctech at classiccmp.org> wrote:
Power Supplies, due to their Weight, are placed at the
bottom of Racks
(prevent tip overs / weight distribution).
https://avitech.com.au/?page_id=366
The PDP-11/70 Maintenance and Installation Manual (EK-11070-MM-002)
explains that the basic PDP-11/70 system components are located in a double
cabinet as shown in Figure 1-1 of that manual.
https://i0.wp.com/avitech.com.au/wp-content/uploads/2016/05/major-assemblie…
greg
Date: Sat, 4 Dec 2021 19:28:01 -0800
From: Marc Howard <cramcram at gmail.com>
To: "General Discussion: On-Topic Posts Only" <cctech at classiccmp.org>
Subject: Need picture of power supply mounted in 11/40 cabinet
1112
days inactive
1113
days old
1 comments
2 participants
participants (2)
-
billdegnan＠gmail.com -
w9gb＠icloud.com