5 Apr
1998
5 Apr
'98
5:49 p.m.
<I acquired a TRS-80 VOXBOX last week. It is in the original box
<with cable, interface box, mic, and three casette tapes. I remember
<when RS was selling these. Has anyone ever used one? Did they actually
<work?
<
<Any historical insight is appreciated.
It speaks, classic mechanical sounding speech. Rather fun to play with.
Allison
5 Apr
5 Apr
6:07 p.m.
Allison J Parent wrote:
<I acquired a TRS-80 VOXBOX last week. It is in the original box
<with cable, interface box, mic, and three casette tapes. I remember
<when RS was selling these. Has anyone ever used one? Did they actually
<work?
<
<Any historical insight is appreciated.
It speaks, classic mechanical sounding speech. Rather fun to play with.
The VoxBox was voice input, not output. I never actually saw one in
action, they were being discontinued about the time I joined Tandy in
late '80. The voice synthesizer was another story, they worked much
better than most folks would expect. Unfortunately, both devices were
_strictly_ for the Model One, there was never a way to attach either
to a Model 3 or later system -- the voice synthesizer for example was
tied to a specific area of video RAM and would output what was sent
there by a "PRINT @" statement. Rather hard to integrate with
packaged software.
--
Ward Griffiths
They say that politics makes strange bedfellows.
Of course, the main reason they cuddle up is to screw somebody else.
Michael Flynn, _Rogue Star_
6 Apr
6 Apr
4:15 p.m.
The VoxBox was a little grey plastic brick with a CB-style microphone
attached. I got one when they first came out. They worked okay,
considering the technology at the time. You had to push-to-talk, and
it could only recognize a few words at a time, but it was fun to play
with. The voice synthesizer was a big grey box made of particle board
with a black cloth front covering a speaker. I believe you're correct
in the operation using PRINT @ statements, but the box was based on a
commonly available sythesis chip (I'll have to dig later if anybody
cares - I think it was either the SC-01 or the SPO-256 from Votrax
and/or General Instrument.) I've still got both, along with the
manuals, if you want any more details. I wrote some software to take
commands via speech, control some lights and appliances with the
"Plug-n-Power" interface for the Model 1, and then give verbal
feedback using the synthesizer. It may not be the most intelligible
voice, but to this day that's still one of my favorite sythesizers; it
sounds so wonderfully robotic!
On Sun, 05 Apr 1998 23:07:23 -0400, you wrote:
Allison J Parent wrote:
-Bill Richman
bill_r(a)inetnebr.com
http://incolor.inetnebr.com/bill_r
(Home of the COSMAC Elf Simulator!)
<I acquired a TRS-80 VOXBOX last week. It is in the original box
<with cable, interface box, mic, and three casette tapes. I remember
<when RS was selling these. Has anyone ever used one? Did they actually
<work?
<
<Any historical insight is appreciated.
It speaks, classic mechanical sounding speech. Rather fun to play with.
The VoxBox was voice input, not output. I never actually saw one in
action, they were being discontinued about the time I joined Tandy in
late '80. The voice synthesizer was another story, they worked much
better than most folks would expect. Unfortunately, both devices were
_strictly_ for the Model One, there was never a way to attach either
to a Model 3 or later system -- the voice synthesizer for example was
tied to a specific area of video RAM and would output what was sent
there by a "PRINT @" statement. Rather hard to integrate with
packaged software.
9610
days inactive
9611
days old
2 comments
3 participants
participants (3)
-
allisonp＠world.std.com -
bill_r＠inetnebr.com -
gram＠cnct.com