Well, if you put the bolt in first (which you'd kind of have to do, if going have to hold it in place while you offer the KY11-L up to the BA11-K. Which was why I was originally thinking, put the bolt in in the other direction, which you can do after you put the KY11-L+adapter in place. But that brings up another idea: put the bolt in place (on the adapter), use a first (thin) nut (with washer, if necessary) to hold it in place, then bolt the adapter to the KY11-L bezel, then mount the whole works up to the BA11-K. Not sure which would work better. I'd probably go with the 'pointing forward' bolt, and use a lock-washer (or one of those nuts with integral lock-washer), and then you can mostly tighten with a Phillips driver from the rear. But the extra washer might be easier to put together (if it doesn't push the KY11-L bezel too far forward). Noel