10 Jul
2001
10 Jul
'01
11:19 a.m.
Hi. Two questions:
First of all, can the mounting platform of the VAXstation 3100 be
transplanted into a DECstation 3100?
Second, does anyone have any mounting rails for a DECstation 3100?
Peace... Sridhar
10 Jul
10 Jul
7:20 p.m.
On 10 Jul, Master of all that Sucks wrote:
First of all, can the mounting platform of the
VAXstation 3100 be
transplanted into a DECstation 3100?
Hmm. I can not guarantee that it fits, but is
is _very_ likely.
Second, does anyone have any mounting rails for a
DECstation 3100?
I used normal screws to mount HDs into my DS3100.
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
11 Jul
11 Jul
12:35 a.m.
How did you use normal screws to mount in that single-screw double-slot
thing?
Peace... Sridhar
On Wed, 11 Jul 2001 jkunz(a)unixag-kl.fh-kl.de wrote:
On 10 Jul, Master of all that Sucks wrote:
First of all, can the mounting platform of the
VAXstation 3100 be
transplanted into a DECstation 3100?
Hmm. I can not guarantee that it fits, but is
is _very_ likely.
Second, does anyone have any mounting rails for a
DECstation 3100?
I used normal screws to mount HDs into my DS3100.
--
tschüß,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
4:22 a.m.
On 11 Jul, Master of all that Sucks wrote:
[mounting platform of the VAXstation 3100]
How did you use normal screws to mount in that
single-screw double-slot
thing?
??? I only remember that four screw-with-a-rubber-collar slip in
mounting.
You are talking about the BA42-A enclosure (4" high), not the BA42-B
enclosure (6" high)?
[disassembling machine stack #3 and taking apart the DS3100]
Indeed, there are two single-screw mounting sleds inside (3,5") and one
screw-with-a-rubber-collar sled (5,25") with the RX23 floppy. I may
messed up this with the interior of the VS3100m76, that is a bit
different to the m3[08] or DS3100.
Hmmm. Get out your drilling machine and drill holes in the mounting
frame where you need them. This is my usual solution to such problems.
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
5:38 a.m.
I really don't want to drill holes. You wouldn't happen to have an extra
sled, would you?
Peace... Sridhar
On Wed, 11 Jul 2001 jkunz(a)unixag-kl.fh-kl.de wrote:
On 11 Jul, Master of all that Sucks wrote:
[mounting platform of the VAXstation 3100]
How did you use normal screws to mount in that
single-screw double-slot
thing?
??? I only remember that four screw-with-a-rubber-collar slip in
mounting.
You are talking about the BA42-A enclosure (4" high), not the BA42-B
enclosure (6" high)?
[disassembling machine stack #3 and taking apart the DS3100]
Indeed, there are two single-screw mounting sleds inside (3,5") and one
screw-with-a-rubber-collar sled (5,25") with the RX23 floppy. I may
messed up this with the interior of the VS3100m76, that is a bit
different to the m3[08] or DS3100.
Hmmm. Get out your drilling machine and drill holes in the mounting
frame where you need them. This is my usual solution to such problems.
--
tschüß,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
8567
days inactive
8568
days old
4 comments
2 participants
participants (2)
-
jkunz＠unixag-kl.fh-kl.de -
vance＠ikickass.org