24 Jul
2021
24 Jul
'21
2:36 a.m.
Hi,
I own a Pro-Log M980 Prom Programmer and want to program a 2732 EProm. I
have everything needed, but how can I get the data in?
There is a serial interface, did anybody have some program for a standard
PC to handle that daa transfer?
Cabling istn't an issue, can do it.
Thanks for helping.
With best regards
Gerhard
24 Jul
24 Jul
7:55 a.m.
On 2021-Jul-24, at 2:36 AM, DI Gerhard Kreuzer via cctalk wrote:
I own a Pro-Log M980 Prom Programmer and want to
program a 2732 EProm. I
have everything needed, but how can I get the data in?
There is a serial interface, did anybody have some program for a standard
PC to handle that daa transfer?
Cabling istn't an issue, can do it.
Thanks for helping.
Do you not have the manual? The M980 manual is on bitsavers.
I have the slightly earlier M900 model, by the front panel they're quite similar.
I've used it for programming 2716s, although it's been a few years. IIRC it's
an ASCII-format protocol for RS-232 serial, so you just have to have a terminal program
you can dump a file through.
Be careful about the hardware communications interfaces. The 9-pin D connector labeled
'serial interface' is not the RS-232 serial standard. There were several firmware
and hardware communication options. Do you have the pro-log adapter, or are you making an
assumption about what's there? My unit had the RS-232/serial firmware option but was
missing the RS-232 adapter, so I had to build one (can be done with just a MAX232 IC).
9:50 a.m.
I had a Data I/O 29B with a serial interface and I assume your Pro-Log is similar.
Cabled up and baud correct you should get a menu on a CR with your host.
Mine took an Intel or Motorala ASCI HEX string on power up without any commands or
prompts.
Randy
________________________________
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of DI Gerhard Kreuzer via
cctalk <cctalk at classiccmp.org>
Sent: Saturday, July 24, 2021 2:36 AM
To: cctalk at classiccmp.org <cctalk at classiccmp.org>
Subject: Pro-Log M980 Programmer
Hi,
I own a Pro-Log M980 Prom Programmer and want to program a 2732 EProm. I
have everything needed, but how can I get the data in?
There is a serial interface, did anybody have some program for a standard
PC to handle that daa transfer?
Cabling istn't an issue, can do it.
Thanks for helping.
With best regards
Gerhard
10:20 a.m.
On Sat, Jul 24, 2021, 11:50 Randy Dawson via cctalk <cctalk at classiccmp.org wrote:
I had a Data I/O 29B with a serial interface and I
assume your Pro-Log is
similar.
Cabled up and baud correct you should get a menu on a CR with your host.
Mine took an Intel or Motorala ASCI HEX string on power up without any
commands or prompts.
Randy
No menu on a Pro-Log. It's a very basic unit powered by an Intel 4004 or
4040.
The manuals on bitsavers do a very good job explaining how to use the 980
and 900, as Brent mentioned.
Kyle
1:32 p.m.
Hi Randy,
thanks for the info. We will give it a try and we will see whats happen.
With best regards
Gerhard
Zitat von Randy Dawson <rdawson16 at hotmail.com>:
I had a Data I/O 29B with a serial interface and I
assume your
Pro-Log is similar.
Cabled up and baud correct you should get a menu on a CR with your host.
Mine took an Intel or Motorala ASCI HEX string on power up without
any commands or prompts.
Randy
?
-------------------------
FROM: cctalk <cctalk-bounces at classiccmp.org> on behalf of DI Gerhard
Kreuzer via cctalk <cctalk at classiccmp.org>
SENT: Saturday, July 24, 2021 2:36 AM
TO: cctalk at classiccmp.org <cctalk at classiccmp.org>
SUBJECT: Pro-Log M980 Programmer?
Hi,
? I own a Pro-Log M980 Prom Programmer and want to program a
2732 EProm. I
have everything needed, but how can I get the data in?
? There is a serial interface, did anybody have some program
for a standard
PC to handle that daa transfer?
? Cabling istn't an issue, can do it.
? Thanks for helping.
? With best regards
? Gerhard
1198
days inactive
1198
days old
4 comments
4 participants
participants (4)
-
bhilpert＠shaw.ca -
gerhard.kreuzer＠liftoff.at -
kylevowen＠gmail.com -
rdawson16＠hotmail.com