25 Jul
1998
25 Jul
'98
8:53 a.m.
So, can I access the actual data with a non-CP/M comm program?
It will read Apple CP/M disks, which are in the same
format as
regular Apple disks. Its just the layout of the data on the sectors
that is different.
Because I was, and currently am, using Netscape which I have access to
on Saturdays and Tuesdays. BTW, I will be going away for a while. I'm
almost too embarassed to ask this, but what is the listserv adress to
unsubscribe?
You seemed to have done a good job with this reply.
Keep it up.
Sam Alternate e-mail:
dastar(a)siconic.com
-------------------------------------------------------------------------------
Ever onward.
September 26 & 27...Vintage Computer Festival 2
See http://www.siconic.com/vcf for details!
[Last web page update: 07/21/98]
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
25 Jul
25 Jul
9:15 p.m.
On Sat, 25 Jul 1998, Max Eskin wrote:
So, can I access the actual data with a non-CP/M comm
program?
Well, only if the comm-program can transfer the whole raw disk image.
Some can (like ProComm). Otherwise, find yourself the utility called
ShrinkIt. You use ShrinkIt it compress an entire disk into a single file
that you can then transfer to another machine.
Max, you should take all these questions to comp.sys.apple2. They are
better prepared (I hope) to answer all of these questions. You REALLY
need to read a faq, do some research, then ask the questions that you
CAN'T find the answers for anywhere else.
Sam Alternate e-mail: dastar(a)siconic.com
-------------------------------------------------------------------------------
Ever onward.
September 26 & 27...Vintage Computer Festival 2
See http://www.siconic.com/vcf for details!
[Last web page update: 07/21/98]
9:51 p.m.
On Sat, 25 Jul 1998, Sam Ismail wrote:
On Sat, 25 Jul 1998, Max Eskin wrote:
^^^^^^^
Sorry, that should be "ProTerm".
Sam Alternate e-mail: dastar(a)siconic.com
-------------------------------------------------------------------------------
Ever onward.
September 26 & 27...Vintage Computer Festival 2
See http://www.siconic.com/vcf for details!
[Last web page update: 07/21/98]
So, can I access the actual data with a non-CP/M
comm program?
Well, only if the comm-program can transfer the whole raw disk image.
Some can (like ProComm). Otherwise, find yourself the utility called
9494
days inactive
9495
days old
2 comments
2 participants
participants (2)
-
dastar＠ncal.verio.com -
maxeskin＠hotmail.com