19 Aug
2001
19 Aug
'01
5:04 p.m.
On August 19, Chuck McManis wrote:
Would I be correct in assuming that a MXV11 and a
KDF11 would be the
minimum PDP-11/23 that will talk "ODT" ?
I would say yes. A quad-width 11/23 board (KDF11-B) comes to mind
with its onboard console SLU, but then you'e need a memory board,
so...still two boards.
-Dave
--
Dave McGuire
Laurel, MD
20 Aug
20 Aug
4:47 a.m.
At 10:04 PM 8/19/01 -0400, you wrote:
On August 19, Chuck McManis wrote:
The MXV11 has both memory and SLU, so all you need is a KDF11-A dual
width CPU and the MXV11 to get a minimum system that lets you interact
with ODT. Add a boot rom to the MXV11 and you're good to go.
Doug
Would I be correct in assuming that a MXV11 and a
KDF11 would be the
minimum PDP-11/23 that will talk "ODT" ?
I would say yes. A quad-width 11/23 board (KDF11-B) comes to mind
with its onboard console SLU, but then you'e need a memory board,
so...still two boards.
-Dave
--
Dave McGuire
Laurel, MD
8368
days inactive
8369
days old
1 comments
2 participants
participants (2)
-
mcguire＠neurotica.com -
taylor＠crystal.nrl.navy.mil