18 Oct
2015
18 Oct
'15
11:02 a.m.
I have a PDP-11/23+ with 4 MB RAM and two RL02 drives. I can boot RT-11XM,
then run VBGEXE and start ADVENT with no problem.
But TSX-Plus 6.50, at least the version I have, has to run over RT-11SJ, and
VBGEXE reports "Wrong version". And ADVENT won't run by itself (without
VBGEXE), whether SJ or XM.
So is there any way to run ADVENT while running TSX-Plus?
thanks
Charles
18 Oct
18 Oct
11:29 a.m.
On 10/18/2015 12:02 PM, Charles wrote:
I have a PDP-11/23+ with 4 MB RAM and two RL02 drives.
I can boot
RT-11XM, then run VBGEXE and start ADVENT with no problem.
But TSX-Plus 6.50, at least the version I have, has to run over RT-11SJ,
and VBGEXE reports "Wrong version". And ADVENT won't run by itself
(without VBGEXE), whether SJ or XM.
So is there any way to run ADVENT while running TSX-Plus?
thanks
Charles
Create a PDP8 simulator ... :-)
Runs and ducks.
5:24 p.m.
On Oct 18, 2015, at 1:29 PM, ben <bfranchuk at jetnet.ab.ca> wrote:
On 10/18/2015 12:02 PM, Charles wrote:
Charles
It should directly in TSX-Plus . Make sure your current memory limit is 56K.
See below for my attempt. BTW TSX should only use RT11 to ?boot?.
TSX doesn?t run over RT11SJ in this version. TSX replaces all the OS code.
.sh memory
?...
Current job memory limit = 56Kb
Maximum job memory limit = 64Kb
.sh ver
6.20
.run advent
WELCOME TO ADVENTURE!! WOULD YOU LIKE INSTRUCTIONS?
YES
SOMEWHERE NEARBY IS COLOSSAL CAVE, WHERE OTHERS HAVE FOUND FORTUNES IN
TREASURE AND GOLD, THOUGH IT IS RUMORED THAT SOME WHO ENTER ARE NEVER
??.
THIS PROGRAM WAS ORIGINALLY DEVELOPED BY WILLIE CROWTHER. MOST OF THE
FEATURES OF THE CURRENT PROGRAM WERE ADDED BY DON WOODS (DON @ SU-AI).
THE CURRENT VERSION WAS DONE BY MIKE WESTON.
YOU ARE STANDING AT THE END OF A ROAD BEFORE A SMALL BRICK BUILDING.
AROUND YOU IS A FOREST. A SMALL STREAM FLOWS OUT OF THE BUILDING AND
DOWN A GULLY.
I have a PDP-11/23+ with 4 MB RAM and two RL02
drives. I can boot
RT-11XM, then run VBGEXE and start ADVENT with no problem.
But TSX-Plus 6.50, at least the version I have, has to run over RT-11SJ,
and VBGEXE reports "Wrong version". And ADVENT won't run by itself
(without VBGEXE), whether SJ or XM.
So is there any way to run ADVENT while running TSX-Plus?
thanks
Charles
Create a PDP8 simulator ... :-)
Runs and ducks.
If you want authenticity, then a PDP10 and a ASR33 are required?.
Happy Spelunking
Jerry
3303
days inactive
3304
days old
2 comments
3 participants
participants (3)
-
bfranchuk＠jetnet.ab.ca -
charlesmorris800＠centurytel.net -
jsw＠ieee.org