So, I thought it would nice to use a Multia as a wireless machine, after all, it does have PCMCIA ports... My first challenge was that it wouldn't boot. It would startup and get to the cursor and then hang. A new battery was suggested. Rather than use the Rayovac 840, I elected to get a 3 AAA cell holder from Digikey. I replaced it and watched. Sure enough, it started to boot and then put characters on the screen and hung. I powered it off and on and it got further and then hung. Now it won't get that far at all and complains (via 14 LED flashes) that the DRAM is bad. I removed 2 and that didn't work so swapped them and that didn't work. It would make a nice doorstop, but otherwise what are the suggestions?