27 Oct
2006
27 Oct
'06
5:43 p.m.
Subject: Re: Yet Another Old Cyber-Coot
From: ard at p850ug1.demon.co.uk (Tony Duell)
Date: Sat, 28 Oct 2006 00:08:13 +0100 (BST)
To: cctalk at classiccmp.org
Well, the Epson QX10 meets the second of those criteria. It's 3 units
(processor box, keyboard, monitor), but there's only one mains cable (the
monitor, and obviously the keyboard [1] take power from the PSU in the
processor box).
Visual 1050, main box has two floppies and the monitor sits on top of it.
If you have the hard disk (sasi interface) then it's three. Z80, 128k
with 6502 to do monochrome text and graphics. Runs CP/MV2.2 and CP/M+.
For an all in one box, North*Star Advantage Z80, 128k One or two
floppies and hard disk Runs NS*dos, CP/M2.2 or UCSD PASCAL.
For laptop, PX8 with 120k ramdisk wedge. For totable Kaypro 4/84
with 360k 5.25 floppy, 720/781k 3.5" floppy, Turborom with personality
card, Handyman and Advent 1mb ramdisk.
In the range of sperates, will S100 do? I also have others.
I am not sure what you mean by 'in one package'. I personally think the
Epson QX10 is one of the nicest CP/M machines ever, but that has a
separate monitor and keyboard so it might not be 'one package'.
What I mean by "one package" is that the machine is a complete
computer -- monitor and keyboard built in. One plug, one diskette, and
you're off... My personal preference is for separates, in computers,
[1] Although I do have a keyboard from a Ramtek graphics unit which does
have it's own internal mains PSU.
> > I'm also partial to the RML380Z, but mainly becasue that was the first
> > CP/M machine I used )at school).. And to be honest, CP/M was a let-down
> > after the LDOS I used at home on my TRS-80 Model 1.
My $.02 is LDOS was later and had some good ideas but the software base
of applications was smaller.
Perhaps... But CP/M was a hobbyist O/S that sort of became the
industry standard. Cool, in a way. The closest thing to THAT today is
Linux, and that's a tad bit complicated (and too good) for hacking it to
be much use.
I've always thought the analogy is between CP/M and MSDOS (and not
because of the obvious technical similarities). Both are pretty minimal
OSes, both became industry standards, and in both cases there were often
better choices available. And, truth
be told, it's clear that a lot of the people I've seen
post in the last 24 hours obviously know a lot more than I do about
quite a few things. That is as it should be. Normally, I'm the alpha
geek wherever I am, so it's refreshing to think I'll be LEARNING things
for a change. So far, it reminds me of the Aloha Computer Club back in
the 70s... Everybody is knowledgeable, and some VERY much so, but all
experienced in somewhat different areas. Seems like a friendly group,
too. I'm a painfully honest person (I know, I know, liars say that,
too) so I'll let people know when I don't know something. But, I have
I think you are going to fit in here. I certainly consider that the day I
stop learning is the day I die. And I think everyone here is basically
very honset (certainly all the classic computer collectors I've met face
to face are).
6634
days inactive
6634
days old
0 comments
1 participants
participants (1)
-
ajp166＠bellatlantic.net