Hi, All, With all the recent chatter on the VAX8200 on the simh list, I was motivated to dust mine off and do a little digging. I finally took the plunge and got a DMB32 (right now, all I have are the 4 built-in console ports) but while it was easy enough to find the 8.5"x11"-format user guide and technical manual which describe registers and installation and problem diagnosis, I also want the internal cable pinouts and schematics. I know it's harder to find post-Unibus-era C-sized prints since DEC stopped shipping printsets with every order, so I have to ask, does anyone have any schematics for either the T1012 module, the H3033 I/O bulkhead board, or both? I can likely quickly recreate the schematic for the H3033, it's 10 D-shell connectors (8x DB, 1x DC, 1xDD) and 6 30-pin ribbon cable connectors. Lots of signals, but lots of repetition. The D-shell pinouts are in the documenation I already have. The 30-pin connectors/BI fingers are not. But if the schematics are already available, I don't have to buzz one out. http://manx-docs.org/collections/antonio/dec/dmb32ug1.pdf http://manx-docs.org/collections/antonio/dec/dmb32td1.pdf ftp://bitsavers.informatik.uni-stuttgart.de/pdf/dec/vax/vaxbi/EY-5554E-SG-0002_VAXBI_Adapters_Student_Guide_Feb87.pdf Thanks for any new docs. -ethan