"Zane H. Healy" <healyzh at aracnet.com> wrote: Hmm, the video connectors and all the major components are in place, and the board has the number 030-0728-004 on it - Gerhard Lenerz's SGIstuff page says this is an O2 Audio/Video Board (Audio only module would be 030-1145-XXX). Hinv however only detects the board as "Audio: A3 version 1" so the video circuitry must have been disabled somehow. Perhaps there's something to be done about it: There are a few open resistor lands next to the edge connector (R503, R504, R505; R510, R511, R513, R514) and along the lower edge of the board (R556, R557, R558; R569, R573, R575, R576; R587, R593) and three SMD inductors (L512, L513, L514) missing on the solder side. So long, Arno Kletzander -- Arno Kletzander Student Assistant // Studentische Hilfskraft Informatik Sammlung Erlangen www.iser.uni-erlangen.de Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer