I have just got a Sun 2 clone workststion (Sun boards in an unbranded box) and it won't boot. If any one can decode the 'heartbeat' LEDs here is the code. Looking down at the edge of the CPU board: =============[Empty connector]=========[oxxx ooox]==================== where x is LED off and o is LED on. I would like to mend this myself if possible. If it is going to require component level diagnosis and repair then please bear in mind that I haven't used a soldering iron or meter in anger since I was mending televisions at school - when they all had 405 lines on the screen and valves. Regards Pete