30 Dec
2007
30 Dec
'07
4:41 a.m.
Hi,
I'm looking for Software & Manuals for any of the MUMPS implementations for the
PDP-11,
e.g. MUMPS-11, DSM-11 or M/11+.
Can anybody help?
Regards,
Ulli
30 Dec
30 Dec
7:45 p.m.
At 1:41 PM +0100 12/30/07, H?lscher wrote:
I'm looking for Software & Manuals for any of
the MUMPS implementations for the PDP-11,
e.g. MUMPS-11, DSM-11 or M/11+.
Can anybody help?
Doubtful, the only person I'm aware of having any
copies lives in Holland, and I've not seen any
sign of him online for a long time now. I know I
do not have a copy of either the software or the
manuals.
Zane
--
| Zane H. Healy | UNIX Systems Administrator |
| healyzh at aracnet.com (primary) | OpenVMS Enthusiast |
| MONK::HEALYZH (DECnet) | Classic Computer Collector |
+----------------------------------+----------------------------+
| Empire of the Petal Throne and Traveller Role Playing, |
| PDP-10 Emulation and Zane's Computer Museum. |
| http://www.aracnet.com/~healyzh/ |
11 Jan
11 Jan
9:39 p.m.
New subject: Detailed XXDP Information Needed
H?lscher wrote:
While preparing to test some of my Q-bus equipment
with XXDP+ I found out that most of the diagnostic programs are not very well documented
(at least not in public available manuals).
Information I need:
- names and detailed descriptions of tests & subtests
(e.g. diagnostic ZRXF has got 36 (!) tests)
- description and interpretation of error codes and messages
(e.g. diagnostic ZRLH: ERR 200 TST 20 SUB 000 "SK OP-FLAG MODE")
Is there a comprehensive manual (not just only what's in the PDP11 Diagnostic
Handbook XXDP 1988) available somewhere or has anyone got the sources for the following
tests:
RXV21/RX02: ZRXD ZRXE ZRXF
RLV12/RL02: ZRLG ZRLH ZRLI ZRLJ ZRLK ZRLM ZRLN VRLB
I know there are some XXDP sources online at Henk's website (http://www.pdp-11.nl/),
but unfortunately not the ones I need :-((
Any help is very much appreciated!
Regards, Ulli
DEC diagnostics (of which I was the author of several way back when)
were only ever documented in the assembler listing. Typically when a
customer bought a particular option/CPU, they received paper tape
binaries (or later, disk/magtape media) of the binaries and printed
hardcopy of the assembled source (later on this migrated to microfiche
as well). DEC never distributed (to my knowledge) machine readable
listings and/or source files.
All the operation modes and options of the diagnostic are given in the
text at the beginning of the diagnostic. Sometimes there is a summary
listing of tests, sometimes not.
When a particular test fails, the expected process was for the FE to
look at the test code in the listing and try and figure out what to fix
(by the early 80s this meant board swap).
So unless you can find program listings, most of the error messages in a
printout will be esoteric at best and hard to connect to a particular
failure.
8 Dec
8 Dec
4 a.m.
New subject: RSTS/E problem
Either you specified too low a value for max jobs (2?) or you don't have any swap
space. Remember that RSTS requires swap space for each job; it isn't willing to allow
a job to exist just because there's memory for it, it insists that it has to be able
to swap it out.
paul
-----Original Message-----
From: cctalk-bounces at classiccmp.org [mailto:cctalk-
bounces at classiccmp.org] On Behalf Of H?lscher
Sent: Sunday, December 07, 2008 1:26 PM
To: cctalk at classiccmp.org
Subject: RSTS/E problem
Hi,
after installing and SYSGENing of RSTS/E V9.6 I get the following
error:
Beginning RSTS/E system startup...
88.12.07 12:10 Installing monitor overlays
88.12.07 12:10 Mounting disks
88.12.07 12:10 Assigning logical names
88.12.07 12:10 Starting error logging
?ERRINT - ?No room for user on device at Line 1265
88.12.07 12:10 Setting system characteristics
07-Dec-88 12:10 PM Installing run-time systems and libraries
07-Dec-88 12:10 PM Setting terminal characteristics
07-Dec-88 12:10 PM Defining system commands
07-Dec-88 12:10 PM Setting printer characteristics
07-Dec-88 12:10 PM Starting spoolers
?Unable to start Print/Batch Services
?No room for additional jobs
Could anyone please give me advice/hints?
Regards,
Ulli
5857
days inactive
6201
days old
3 comments
4 participants
participants (4)
-
ak6dn＠mindspring.com -
healyzh＠aracnet.com -
hoelscher-kirchbrak＠freenet.de -
Paul_Koning＠Dell.com