10 Nov
2005
10 Nov
'05
8:43 p.m.
Subject: Re: Discharging a VT100 CRT
From: ard at p850ug1.demon.co.uk (Tony Duell)
Date: Thu, 10 Nov 2005 19:55:37 +0000 (GMT)
To: cctalk at classiccmp.org
That is true but I gave him the spec for the diode that was there.
As is the 4006 is a 600V device.
Hey around here anytime I need a 1A diode it's a 1N4007 as I buy
them 100 at a time cheap. They make good varactors an passable
HF low VHF PIN diodes.
Allison
CR408 is a 1A 400V diode (1n4006 should do)
Is there any reaosn not to use a 1N4007 here as well? I generally don't
buy the other IN400x's as I've yet to find an application where too high
a PIV is a problem.
-tony 
10 Nov
10 Nov
9:39 p.m.
Are these two parts something I can buy at RS? I don't want to have to
drive 20 miles to the nearest real component store if possible.
-----Original Message-----
From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org]
On Behalf Of Allison
Sent: Thursday, November 10, 2005 2:44 PM
To: cctalk at classiccmp.org
Subject: Re: Discharging a VT100 CRT
Subject: Re: Discharging a VT100 CRT
From: ard at p850ug1.demon.co.uk (Tony Duell)
Date: Thu, 10 Nov 2005 19:55:37 +0000 (GMT)
To: cctalk at classiccmp.org
That is true but I gave him the spec for the diode that was there.
As is the 4006 is a 600V device.
Hey around here anytime I need a 1A diode it's a 1N4007 as I buy
them 100 at a time cheap. They make good varactors an passable
HF low VHF PIN diodes.
Allison
CR408 is a 1A 400V diode (1n4006 should do)
Is there any reaosn not to use a 1N4007 here as well? I generally don't
buy the other IN400x's as I've yet to find an application where too high
a PIV is a problem.
-tony 
11 Nov
11 Nov
12:55 a.m.
Subject: Re: Discharging a VT100 CRT
From: ard at p850ug1.demon.co.uk (Tony Duell)
Date: Thu, 10 Nov 2005 19:55:37 +0000 (GMT)
To: cctalk at classiccmp.org
That is true but I gave him the spec for the diode that was there.
As is the 4006 is a 600V device. CR408 is a 1A 400V diode (1n4006 should do)
Is there any reaosn not to use a 1N4007 here as well? I generally don't
buy the other IN400x's as I've yet to find an application where too high
a PIV is a problem.
-tony
Hey around here anytime I need a 1A diode it's a 1N4007 as I buy
them 100 at a time cheap. They make good varactors an passable
HF low VHF PIN diodes.
Indeed.
-tony
6997
days inactive
6998
days old
2 comments
3 participants
participants (3)
-
ajp166＠bellatlantic.net -
ard＠p850ug1.demon.co.uk -
fireflyst＠earthlink.net