12 Sep
2005
12 Sep
'05
12:18 a.m.
The following messages does not seem to get through.
"First part of October I will be getting a custom build prom-programmer with
software that programs and reads 2716's. And two Tektronix tube scopes, one
from 1954 and one from 1960. Also a prototype Commodore
64."
12 Sep
12 Sep
1:17 a.m.
Keys wrote:
The following messages does not seem to get through.
"First part of October I will be getting a custom build prom-programmer
with
software that programs and reads 2716's. And two Tektronix tube scopes,
one
from 1954 and one from 1960. Also a prototype Commodore 64."
Does the 1954 scope pre-date the list here? Wait you need
vintage test equipment too!
--------------------------
Smiley not included . Add $.25 for shipping and handling.
PS. Check if you got a power supply that supplies the
prom programmer for the programing voltage if it is
not built in.
13 Sep
13 Sep
3:02 a.m.
I believe the 1954 unit is a model 534.
----- Original Message -----
From: "woodelf" <bfranchuk at jetnet.ab.ca>
To: <General at cnc.net>; "Discussion at cnc.net:On-Topic and Off-Topic
Posts"
<cctalk at classiccmp.org>
Sent: Sunday, September 11, 2005 8:17 PM
Subject: Re: New Toy Message Resend
Keys wrote:
The following messages does not seem to get
through.
"First part of October I will be getting a custom build prom-programmer
with
software that programs and reads 2716's. And two Tektronix tube scopes,
one
from 1954 and one from 1960. Also a prototype Commodore 64."
Does the 1954 scope pre-date the list here? Wait you need
vintage test equipment too!
--------------------------
Smiley not included . Add $.25 for shipping and handling.
PS. Check if you got a power supply that supplies the
prom programmer for the programing voltage if it is
not built in.
12 Sep
12 Sep
2:35 a.m.
On 9/11/05, Keys <jrkeys at concentric.net> wrote:
The following messages does not seem to get through.
"First part of October I will be getting a custom build prom-programmer with
software that programs and reads 2716's. And two Tektronix tube scopes, one
from 1954 and one from 1960. Also a prototype Commodore 64."
I would love to see photos of the prototype C-64. I have an early
one, but seeing pre-production hardware would be cool.
For those that might not remember earlier tales, my first job ever was
programming the WordVision demo for Bruce and James Publishers on a
pre-public-release development machine from Commodore. My prior PET
experience got me the job.
-ethan
3:24 p.m.
On Sun, 11 Sep 2005, Ethan Dicks wrote:
On 9/11/05, Keys <jrkeys at concentric.net>
wrote:
Here's one we tried auctioning a couple years back:
http://www.vintage.org/special/2003/c64prototype/
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
[ Old computing resources for business || Buy/Sell/Trade Vintage Computers ]
[ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]
The following messages does not seem to get
through.
"First part of October I will be getting a custom build prom-programmer with
software that programs and reads 2716's. And two Tektronix tube scopes, one
from 1954 and one from 1960. Also a prototype Commodore 64."
I would love to see photos of the prototype C-64. I have an early
one, but seeing pre-production hardware would be cool.
3:38 p.m.
On 9/12/05, Vintage Computer Festival <vcf at siconic.com> wrote:
Here's one we tried auctioning a couple years
back:
http://www.vintage.org/special/2003/c64prototype/
Thanks!
-ethan
13 Sep
13 Sep
1:07 a.m.
Will get pic's after it gets here.
----- Original Message -----
From: "Ethan Dicks" <ethan.dicks at gmail.com>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Sent: Sunday, September 11, 2005 9:35 PM
Subject: Re: New Toy Message Resend
On 9/11/05, Keys <jrkeys at concentric.net>
wrote:
The following messages does not seem to get
through.
"First part of October I will be getting a custom build prom-programmer
with
software that programs and reads 2716's. And two Tektronix tube scopes,
one
from 1954 and one from 1960. Also a prototype Commodore 64."
I would love to see photos of the prototype C-64. I have an early
one, but seeing pre-production hardware would be cool.
For those that might not remember earlier tales, my first job ever was
programming the WordVision demo for Bruce and James Publishers on a
pre-public-release development machine from Commodore. My prior PET
experience got me the job.
-ethan
7047
days inactive
7048
days old
6 comments
4 participants
participants (4)
-
bfranchuk＠jetnet.ab.ca -
ethan.dicks＠gmail.com -
jrkeys＠concentric.net -
vcf＠siconic.com